Review | KitGuru https://www.kitguru.net KitGuru.net - Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards Wed, 27 Mar 2024 16:41:50 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.3 https://www.kitguru.net/wp-content/uploads/2021/06/cropped-KITGURU-Light-Background-SQUARE2-32x32.png Review | KitGuru https://www.kitguru.net 32 32 Boulies Nubi Office Chair Review https://www.kitguru.net/gaming/mat-mynett/boulies-nubi-office-chair-review/ https://www.kitguru.net/gaming/mat-mynett/boulies-nubi-office-chair-review/#respond Wed, 27 Mar 2024 13:00:28 +0000 https://www.kitguru.net/?p=651682 The Nubi office chair from Boulies aims to deliver ergonomics and comfort

The post Boulies Nubi Office Chair Review first appeared on KitGuru.]]>
After recently reviewing the whole range of gaming chairs on offer from Boulies, we received multiple comments over on our YouTube channel regarding office chairs and how many people prefer them over their gaming counterparts. Well, today we have just that for review – the Nubi office chair from Boulies. It aims to deliver the looks and ergonomics to fit in any workplace, all while keeping the bulk to a minimum. Can this compact office chair deliver all day comfort and boost your productivity?

Watch the video via our VIMEO Channel (Below) or over on YouTube at 2160p HERE


Timestamps:

00:00 Start
00:31 The Nubi / pricing
01:40 Design
03:33 Controls / adjustability
05:30 Comfort
07:16 Building the chair – thoughts
09:26 Closing Thoughts

Specifications:

  • Upholstery – Boulies 100% polymer NUO fabric
  • Frame – Steel and engineering plastics
  • Five star foot base – Engineering plastic
  • Foam – BioCurve Sponge(100% Cold-cure foam)
  • Tilt mechanism – Multi tilt
  • Casters – 6cm PU casters
  • Hydraulics  – Class 4 (Top Class)
  • Recommended weight – Less than 120KG
  • Seat Height – 43.5-54.5cm
  • Seat Depth – 46.5-52.5cm
  • Backrest Height – 61.5cm
  • Arm Height – 62.5-80cm
  • Backrest Width – 38cm
  • Seat Width – 50cm
  • Wheelbase Diameter – 60.5cm

You can buy the Nubi office chair directly from Boulies for an RRP £399.99 HERE.

Discuss on our Facebook page HERE.

Pros:

  • Adjustable seat depth and seat angle.
  • Good quality fabric finish.
  • Modern office suitable design.
  • Subtle branding.

Cons:

  • Lacks lumbar support.
  • Lacks a headrest.
  • Slightly expensive.
  • Some rattle on seat base when seat depth is extended.

KitGuru says: The Nubi is great for overall leg comfort but is let down by a lack of head, neck and lumbar support. 

Be sure to check out our sponsors store EKWB here

The post Boulies Nubi Office Chair Review first appeared on KitGuru.]]>
https://www.kitguru.net/gaming/mat-mynett/boulies-nubi-office-chair-review/feed/ 0
Antec Constellation C8 Case Review https://www.kitguru.net/components/cases/james-dawson/antec-constellation-c8-case-review/ https://www.kitguru.net/components/cases/james-dawson/antec-constellation-c8-case-review/#respond Mon, 25 Mar 2024 13:00:07 +0000 https://www.kitguru.net/?p=652232 Looking for a O11D alternative? You might want to take a look the Antec Constellation C8

The post Antec Constellation C8 Case Review first appeared on KitGuru.]]>
The last time we looked at a product from Antec was to review the Torque chassis almost five years ago. Well, that changes today as we are checking out the Constellation C8, featuring a dual chamber layout which is becoming the common choice of new case design now. But can it compete with other dual-chamber chassis that we have reviewed recently? Let’s find out.

Watch the video via our VIMEO Channel (Below) or over on YouTube at 2160p HERE


Timestamps:

00:00 Start
00:42 Overview and pricing
01:29 Strip down and Front I/O
02:48 Inside the case – hardware support
05:43 Cable management and air duct partition
06:33 Construction and white cabling
06:58 Power supply and storage
07:42 Rear side
08:24 Back side
08:50 Underside
09:45 Test System
10:45 Thermal Performance
12:06 Some mods we made
13:39 Future improvements
14:28 Is it worth buying?

Antec Constellation C8 Features:

  • Constellation C8 is a dual-chamber chassis featuring tempered glass with 45-degree bevelled edges for a seamless joint and a completely transparent panoramic view of the internal components.
  • The interior can accommodate three 120/140mm or two 160mm fans in the roof and floor for powerful and efficient cooling and up to three 120mm side fans.
  • As well as great fan support the case allows for the installation of three 360mm radiators simultaneously, vertical GPU mounting and modular drive trays.
  • Graphics cards up to 440mm long, CPU coolers up to 175mm tall and power supplies up to 210mm can all fit inside the Constellation C8.
  • The robust chassis is constructed from high-grade materials including 0.8 and 1.0 mm thick steel combined with tool-free exterior panels for easy access.

Specifications:

  • Case Type: ATX Dual Chamber
  • Dimensions: 464 x 303 x 476mm
  • Material: Steel, Plastic, Glass
  • Motherboard Support: E-ATX (up to 280mm), ATX, Micro-ATX, ITX
  • Expansion Slots: 8
  • Storage Bays: 2 x 3.5”, 4 x 2.5”
  • Max GPU Length: 440mm
  • Max CPU Cooler Height: 175mm
  • Max PSU Size: ATX up to 210mm
  • Fan Support: 3 x 120mm/140mm or 2 x 160mm (Top) 3 x 120mm or 2 x 140mm (Side) 3 x 120/140mm or 2 x 160mm (Bottom) 1 x 120/140mm (Rear)
  • Pre-installed fans: N/A
  • Radiator Support: 360/280/240/120 (Top, side, bottom) 120mm (Rear)
  • Dust Filters: Bottom
  • Font I/O: 2 x USB 3.0 Type, 1 x USB Type-C (10Gbps) combined 3.5mm audio jack, power and reset buttons
  • LCD Screen:  N/A

Thermal Performance Testing

To simulate thermal demand we run the Cinebench R23 multi-thread benchmark and 3DMark Speed Way stress test simultaneously in a loop for 30 minutes to load the system fully. This gives the CPU and GPU enough time to reach constant steady-state temperature. With this data, we can compare how the system handles the thermal demand and measure peak noise levels.

Thermal performance is measured with the case in various configurations, such as the default, with the tempered glass left-hand side panel removed and with the front panel removed to see how these configurations affect the CPU and GPU temperature. During testing, only stock case fans are used unless otherwise specified. All water pumps are set to maximum RPM and fans are set to a custom RPM curve by the Motherboard software/BIOS.

All temperature measurements are presented as Deltas – meaning the ambient temperature has been deducted from the CPU temperature giving us a Delta. Data shown in the charts represent the average component temperature over the length of the test as measured by HWiNFO and then the last 15 minutes of the data are calculated to get the average. The ambient temperature during thermal tests is between 20-22⁰C.

Test System Specification:

Thermal Performance Overview

We tested the case in several configurations with case fans set at a fixed rpm and the AIO cooler fans running the silent profile in the Gigabyte motherboard BIOS.

Changing the case configuration has minimal impact on thermal performance with the Antec C8. Both the CPU and GPU temperatures remain consistent when removing panels and repeating the thermal load test.

The only minor change in temperature is recorded when the top and right-hand panels are removed, CPU temperature in this configuration drops by a couple of degrees C. The perforated panels may be causing a minor airflow restriction, but the temperature change is minimal and nothing to be concerned about.

These component temperatures are typical of the test system hardware and what we would expect from a well-ventilated dual chamber case.

It’s a similar pattern with noise output too, in either configuration the noise output is very constant. Removing panels has little effect on noise output but there is a very minor drop in noise when removing the perforated top and side panels as the CPU cooler fans ran at a slightly lower RPM, but again the difference in noise is so small it's of no concern.

Closing Thoughts

As a budget alternative to the Lian Li O11D, the Antec Constellation C8 is one of the better options on the market. Not only that, but it seems like much better value than some of the alternatives such as the Corsair 6500X. The C8 is cheaper, offers similar features and is a very well-built chassis. The only advantage the 6500X has is reverse connector motherboard support which won't mean much to most users.

I was not expecting much from the Antec C8 when it arrived for review but I have been pleasantly surprised by the ultra-robust build quality, extensive hardware and cooling support and features like the tool-free panel removal and interchangeable floor fan mount, all for under £100 and available in black or white. It's not quite as cheap as the Montech King 95 and maybe not as good-looking but it’s a solid alternative if you are after the more understated look.

There are some minor niggles with the case, like the lack of fully removable fan/radiator mounts, and for some reason which I can't understand, Antec decided not to allow for the installation of three 140mm fans on the side bracket even when the dimensions are there to accommodate it as shown in the video. Other than those slight flaws though, there's really not much to complain about.

Ultimately, if you are in the market for a dual chamber case and want to save a few quid on the Lian Li options, don’t need Corsair iCUE Link integration or reverse connector motherboard support and maybe find the King 95 looks a little too aggressive, then the Antec Constellation C8 might be the next PC case for you. If I was looking for a dual-chamber case now it would be one that I would consider for sure.

The Antec Constellation C8 is available to purchase now at Scan priced at £99.99 or Amazon for £108.90 HERE.

Discuss on our Facebook page HERE.

Pros:

  • 120mm and 140mm fan support all round.
  • Very high build quality
  • Pleasant build experience and good cable management.
  • Priced well versus the competition.

Cons:

  • No removable fan/rad brackets at all.
  • Space for three 140mm fan installations on the side mount isn’t utilised.

KitGuru says: If you have a £100 budget and want a dual chamber case the Antec Constellation C8 is worth serious consideration.

Be sure to check out our sponsors store EKWB here

The post Antec Constellation C8 Case Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/cases/james-dawson/antec-constellation-c8-case-review/feed/ 0
EK-Fluid Gaming Digital Reef PC Review – EKWB’s 5K Prebuilt! https://www.kitguru.net/desktop-pc/gaming-rig/leo-waldock/ek-fluid-gaming-digital-reef-pc-review/ https://www.kitguru.net/desktop-pc/gaming-rig/leo-waldock/ek-fluid-gaming-digital-reef-pc-review/#respond Fri, 22 Mar 2024 12:00:06 +0000 https://www.kitguru.net/?p=652134 It's a custom-cooled prebuilt from EKWB, packing a 14900KS and RTX 4090

The post EK-Fluid Gaming Digital Reef PC Review – EKWB’s 5K Prebuilt! first appeared on KitGuru.]]>
We have seen examples of PCs from the EK Fluid Gaming range at shows such as CES, however this is the first time we have been sent one of their PCs for review. The EK-Fluid Gaming Digital Reef PC has a slightly peculiar name and a specification that promises a huge amount, combining an Intel Core i9-14900K with RTX 4090 graphics that is cooled, naturally, by a full system of EK Quantum custom loop hardware.

Watch the video via our VIMEO Channel (Below) or over on YouTube at 2160p HERE


Time Stamps
00:00 Start
01:32 The PC and accessories
03:34 Putting coolant in the PC
05:48 The BIOS
06:12 A look at the cabling
07:04 Benchmarking the system
07:58 Game Performance
08:32 Leo’s Thoughts on the system

Specification:

  • CPU  Intel Core i9 14900K
  • GPU Nvidia GeForce RTX 4090
  • Motherboard Asus ROG Maximus Z790 Hero
  • RAM 64GB (2x32GB) DDR5 6000MHz RGB (G.Skill Trident Z5 RGB in our sample)
  • SSD Primary 1TB PCIe 4.0 M.2 Seagate FireCuda 530
  • SSD Secondary 2TB PCIe 4.0 M.2 Seagate FireCuda 530

EK Quantum Custom Loop Liquid Cooling:

  • Monoblock EK Quantum Momentum2 D-RGB Plexi
  • GPU block EK Quantum Vector2
  • Pump/reservoir EK Quantum Reflection Uni 140 DDC
  • Radiator EK Quantum Surface X420M
  • Fans 6x EK Loop Fan FPT 140mm D-RGB
  • Case Fractal Design Torrent
  • Power supply Seasonic Vertex GX 1200W Gold
  • OS Windows 11 Home
  • Warranty 3-Year on Support, Parts, Labour
  • Support Support Tickets, Email, Social Media

Performance and Testing

In our video we show some benchmark runs of Cinebench R23 and 3D Mark Fire Strike, along with Marvel's Guardians of the Galaxy and Far Cry 6 at 4K on Ultra settings. On this occasion we haven't bombarded you with graphs as we know full well that an Intel Core i9-14900K combined with RTX 4090 graphics makes for the basis of a superb gaming PC.

What we were doing in those test runs was confirming that the EK custom loop cooling works well (it does), that the Core i9 runs reasonably cool and the graphics card is fabulously cool. This illustrates the difficulty of keeping the Core i9-14900K under control however, as James will demonstrate in a review that is coming very soon, the  best approach is to delid the CPU and then use direct die cooling. In other words, while the cooling in the Digital Reef is good, it is not quite the ultimate.

Closing Thoughts

The concept of the EK-Fluid Gaming Digital Reef is quite straightforward. EK has taken the champion gaming CPU, matched it with the king of gaming graphics cards and then wrapped the hardware in a top notch cooling system. The result is maximum performance with the minimum of noise, along with a hefty dose of RGB lighting that sets of the violet coolant to perfection.

When we cost the components in a pre-built PC we usually find they come to the same total as the selling price of the PC itself. This means the customer effectively gets their PC built free of charge and also gets a warranty which is a nice touch.

In the case of the EK-Fluid Gaming Digital Reef it is clear there has been a considerable amount of development work and that the build would take many hours of skilled labour. On the one hand we are looking at a very expensive PC but on the other hand it represents surprisingly good value for money.

You can buy the EK-Fluid Gaming Digital Reef PC HERE.

Discuss on our Facebook page HERE.

Pros:

  • Superb performance and cooling.
  • Noise levels are very low.
  • These components cost £5,000 so the fabulous EK build is effectively free of charge.

Cons:

  • Currently there are no options to change components or to specify overclocking.
  • The ticket price is high.
  • It would help if EK told us the radiator holds xxx ml of coolant.
  • The included Asus Hyper M.2 card cannot be used as the vertical GPU blocks the PCIe slots.

KitGuru says: The EK-Fluid Gaming Digital Reef PC delivers loads of stomp and looks great.

Be sure to check out our sponsors store EKWB here

The post EK-Fluid Gaming Digital Reef PC Review – EKWB’s 5K Prebuilt! first appeared on KitGuru.]]>
https://www.kitguru.net/desktop-pc/gaming-rig/leo-waldock/ek-fluid-gaming-digital-reef-pc-review/feed/ 0
Inno3D RTX 4070 Super Twin X2 Review https://www.kitguru.net/components/graphic-cards/dominic-moass/inno3d-rtx-4070-super-twin-x2-review/ https://www.kitguru.net/components/graphic-cards/dominic-moass/inno3d-rtx-4070-super-twin-x2-review/#respond Thu, 21 Mar 2024 12:00:11 +0000 https://www.kitguru.net/?p=652067 It's a stripped-back graphics card without a ton of features - but is it worth buying?

The post Inno3D RTX 4070 Super Twin X2 Review first appeared on KitGuru.]]>
Today we're back with another look at Nvidia's RTX 4070 Super, perhaps the most well-received of the three 40-series Super refreshes that launched at the start of the year. Specifically we are reviewing the Inno3D Twin X2 model, a compact graphics card that aims to deliver a ‘no frills' experience, targeting those who want a quiet and cool-running GPU without added bells and whistles to drive up the price.

You could say that the Inno3D RTX 4070 Super Twin X2 is most notable for the features it lacks, rather than what it offers – there's no RGB for instance, no dual-BIOS, no factory overclock or even the ability to raise the power limit beyond stock figures. Instead, it is very much a ‘throwback' graphics card, prioritising low noise and temperatures while retaining a compact footprint. Coming in at £589.99 here in the UK it is one of the cheapest 4070 Supers on offer, so let's see how it performs.

RTX 4080 RTX 4070 Ti Super RTX 4070 Ti RTX 4070 Super RTX 4070
Process TSMC N4 TSMC N4 TSMC N4 TSMC N4 TSMC N4
SMs 76 66 60 56 46
CUDA Cores 9728 8448 7680 7168 5888
Tensor Cores 304 264 240 224 184
RT Cores 76 66 60 56 46
Texture Units 304 264 240 224 184
ROPs 112 96 80 80 64
GPU Boost Clock 2505 MHz 2610 MHz 2610 MHz 2475 MHz 2475 MHz
Memory Data Rate 22.4 Gbps 21 Gbps 21 Gbps 21 Gbps 21 Gbps
L2 Cache 65536 KB 49152 KB 49152 KB 36864 KB 36864 KB
Total Video Memory 16GB GDDR6X 16GB GDDR6X 12GB GDDR6X 12GB GDDR6X 12GB GDDR6X
Memory Interface 256-bit 256-bit 192-bit 192-bit 192-bit
Memory Bandwidth 716.8 GB/Sec 672 GB/Sec 504 GB/Sec 504 GB/Sec 504 GB/Sec
TGP 320W 285W 285W 220W 200W

First, a quick spec recap. Just like the RTX 4070 Ti and RTX 4070, the new 4070 Super uses a cut-down AD104 die, measuring 295mm2. The fundamental building blocks are still the same of course, with the RTX 4070 Super offering a total of 56 Streaming Multiprocessors (SMs), each housing 256 CUDA Cores, for a total of 7168. We also find 56 RT cores, 224 Tensor cores, 224 Texture Units, and 80 ROPs.

TSMC's N4 node has Nvidia cranking up the clock speed significantly this generation, with the RTX 4070 Super sporting the same 2475MHz rated boost clock as the original model. Inno3D's Twin X2 model we are reviewing does not come factory overclocked.

The memory configuration also remains the same as both the 4070 and 4070 Ti. That means a relatively narrow 192-bit memory interface, so even with 12GB GDDR6X running at 21Gbps, total memory bandwidth comes in at 504 GB/s, lower than the RTX 3070 Ti. That said, there has been a substantial upgrade to the L2 cache with the Ada architecture, with the RTX 4070 now offering 49.1MB, compared to just 6MB for GA102.

Considering the increased core-count, power draw is naturally a touch higher than the RTX 4070, with the 4070 Super boasting a 220W TGP. Inno3D has not increased this out of the box for the Twin X2, and the power limit cannot be manually increased beyond 220W.

Be sure to check out our sponsors store EKWB here

The post Inno3D RTX 4070 Super Twin X2 Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/graphic-cards/dominic-moass/inno3d-rtx-4070-super-twin-x2-review/feed/ 0
Cooler Master GP2711 Review (Budget Mini-LED) https://www.kitguru.net/peripherals/dominic-moass/cooler-master-gp2711-review-budget-mini-led/ https://www.kitguru.net/peripherals/dominic-moass/cooler-master-gp2711-review-budget-mini-led/#respond Wed, 20 Mar 2024 12:00:20 +0000 https://www.kitguru.net/?p=651139 Proper HDR with 576 dimming zones - for £380?! Surely there's a catch

The post Cooler Master GP2711 Review (Budget Mini-LED) first appeared on KitGuru.]]>
HDR displays have been one of the growing trends in the monitor market over the last few years. We know what OLED and premium mini-LED screens can deliver, but they are still very expensive and out of reach for most mainstream consumers. Not so with the Cooler Master GP2711, however, offering a mini-LED display with 576 dimming zones, for less than £380 here in the UK. But just how well does it perform? Find out in today's review.

Watch the video via our VIMEO Channel (Below) or over on YouTube at 2160p HERE


Alongside its HDR chops, the Cooler Master GP2711 features a VA panel with a quantum dot layer, promising very wide gamut support. It also offers a claimed 3000:1 contrast ratio, 165Hz refresh rate and 4ms GtG response time. All of that in a monitor that is retailing for £379 certainly seems like an attractive deal on paper – so let's find out just how good it is.

Specification:

  • Product Number: CMI-GP2711
  • Panel Type: Flat Series
  • Ratio: 16:9
  • Screen Size: 27″
  • Panel: VA 16.7M w/ Quantum Dot
  • Resolution: 2K QHD 2560×1440
  • Frame Rate: 165 Hz
  • Contrast Ratio: 3000:1 (Typ.), 3,000,000:1 (HDR)
  • Viewing Angle (H/V): 178°/178°
  • Brightness: 600 nits (Typical)
  • HDR: HDR1000 Compatible
  • HDR Peak Brightness: 1500 nits
  • Dimming Zones: 576 Zones
  • CIE Color Model: CIE 1976
  • Color Gamut: DCI-P3 95%, Adobe RGB 93.5%, sRGB 99%, 130% Area Ratio
  • I/O:
    • HDMI 2.0: 2
    • DP 1.4: 1
    • USB Type C: 1 (PD 15W + DP ALT)
    • USB 3.0 Type B: 1
    • USB 3.0 Type A: 2
    • 3.5mm Audio Out: 1
    • Speaker: 2 (2W)
  • DCR (Dynamic Contrast Ratio): Yes
  • Overdrive Technology: Yes
  • VRR Technology: AMD FreeSync
  • Response Time: 4ms (GtG), 1ms (MPRT)
  • Eye Protection: TUV Certificate Hardware Low Blue Light
  • Anti-flicker: TUV Certificate Flicker Free
  • KVM: Yes
  • Power Consumption: 39W*
  • VESA: 100×100 mm
  • Tilt Adjustment: -5°~+20°
  • Swivel Adjustment: ±15°
  • Height Adjustment: 0-110 mm
  • Pivot Adjustment: 0° ±90°

Firmware tested: V1.05

Be sure to check out our sponsors store EKWB here

The post Cooler Master GP2711 Review (Budget Mini-LED) first appeared on KitGuru.]]>
https://www.kitguru.net/peripherals/dominic-moass/cooler-master-gp2711-review-budget-mini-led/feed/ 0
Seagate FireCuda 520N 1TB SSD Review https://www.kitguru.net/components/ssd-drives/simon-crisp/seagate-firecuda-520n-1tb-ssd-review/ https://www.kitguru.net/components/ssd-drives/simon-crisp/seagate-firecuda-520n-1tb-ssd-review/#respond Tue, 19 Mar 2024 12:00:54 +0000 https://www.kitguru.net/?p=642981 Designed for a handheld or ultra-thin laptop, we check out this tiny SSD from Seagate

The post Seagate FireCuda 520N 1TB SSD Review first appeared on KitGuru.]]>
The latest addition to Seagate's FireCuda gaming range is the FireCuda 520N, an M.2 2230 Gen4 drive aimed at the storage upgrade market for portable gaming and compute or ultra-thin devices. We analyse the 1TB model, hitting the market at about £110 here in the UK.

Just two capacities make up the FireCuda 520N product line (at the time of writing) 1TB and the flagship 2TB drive. At the heart of the drive is Phison’s PS5021-E21T 4-channel DRAM-less design controller looking after a 1TB package of Micron 176-layer 3D TLC NAND.

Seagate quotes Sequential performance figures of 5,000MB/s and 3,200MB/s for read and writes respectively for the 2TB drive while the 1TB drive is slower for reads at 4,800MB/s but at 4,700MB/s it has faster write performance than the 2TB model.

Seagate rates the random 4K performance of the 2TB 520N as up to 480,000 IOPs for reads and up to 750,000 IOPS for writes. The 1TB drive is much faster, rated at up to 800,000 IOPS and 900,000 IOPS for reads and writes respectively.

The TBW endurance figure for the 1TB drive is quoted at 600TB. Seagate backs the drive with a 5-year warranty but also includes three years of the company's Rescue Data Recovery Service, a handy bonus.

Physical Specifications:

  • Usable Capacities: 1TB.
  • NAND Components: Micron B47R FortisFlash 176-layer 3D TLC NAND.
  • NAND Controller: Phison PS5021-E21T.
  • Cache: none, DRAM-less design.
  • Interface: PCIe Gen4 x4, NVMe 1.4.
  • Form Factor: M.2 2230.
  • Dimensions: 30.15 x 22.15 x 2.23mm.
  • Drive Weight: 3g.

Firmware Version: SUMSM000

Be sure to check out our sponsors store EKWB here

The post Seagate FireCuda 520N 1TB SSD Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/ssd-drives/simon-crisp/seagate-firecuda-520n-1tb-ssd-review/feed/ 0
Sharkoon OfficePal C30 Chair Review https://www.kitguru.net/tech-news/featured-tech-reviews/mat-mynett/sharkoon-officepal-c30-chair-review/ https://www.kitguru.net/tech-news/featured-tech-reviews/mat-mynett/sharkoon-officepal-c30-chair-review/#respond Mon, 18 Mar 2024 12:00:25 +0000 https://www.kitguru.net/?p=648940 Sharkoon has added an ergonomic office chair to its line-up with the release of the Office Pal C30

The post Sharkoon OfficePal C30 Chair Review first appeared on KitGuru.]]>
Sharkoon is a brand mostly known for its PC cases and keyboards. The company does, however, produce products in a number of other categories, such as chairs. Up until now, they've focused mainly on gaming-orientated ‘bucket' style chairs with vibrant colours and ‘gamer' styling. Well, that's now changing with the release of the OfficePal C30 and C30M. These two ergonomic chairs aim to provide comfort and support whether you're hard at work or relaxing with your favourite game. I've put them through their paces to find out if they deliver…

Watch the video via our VIMEO Channel (Below) or over on YouTube at 2160p HERE


Timestamps:

00:00 Start
00:32 Up close with the chair
03:50 Adjustments and controls
05:05 Mat’s thoughts so far
05:21 Assembly and build quality
06:58 Comfort
08:50 Closing Thoughts

Specifications:

  • Foam Type: High-Density Mould Shaping Foam
  • Foam Density: 45 kg/m³
  • Frame Construction: Nylon
  • Seat Cover Material: Fabric (Seat Base) / Mesh (Backrest)
  • Color Versions: Black
  • Adjustable Armrests: 3D
  • Armrest Pad Size (L x W): 25 x 9 cm
  • Mechanism:
    • Wireline Control Mechanism
    • Tilt Lock
    • Tilt Angle Lock
  • Adjustable Tilt Angle: 0° – 35°
  • Gas Lift Piston: Class 4
  • Seat Back Style: High-Back
  • Adjustable Headrest: 3D
  • Adjustable Backrest: 5 Heights
  • Base Type: Nylon Five-Star Base
  • Wheel Size: 60 mm

We don't currently have UK stock and purchase information for the Sharkoon OfficePal C30 – We will update the page as and when we find out more.

Discuss on our Facebook page HERE.

Pros:

  • Well padded and comfortable seatbase.
  • Convenient adjustment controls.

Cons:

  • Nylon frame and base feels cheap.
  • Wobbly construction.
  • Lacks seat depth adjustment.
  • Armrests are quite low even at max height.

KitGuru says: The OfficePal C30 chair falls short in several areas. Build quality is not great, with the fully assembled chair feeling rather rickety. 

Be sure to check out our sponsors store EKWB here

The post Sharkoon OfficePal C30 Chair Review first appeared on KitGuru.]]>
https://www.kitguru.net/tech-news/featured-tech-reviews/mat-mynett/sharkoon-officepal-c30-chair-review/feed/ 0
Lexar NM790 with Heatsink 4TB SSD Review https://www.kitguru.net/components/ssd-drives/simon-crisp/lexar-nm790-with-heatsink-4tb-ssd-review/ https://www.kitguru.net/components/ssd-drives/simon-crisp/lexar-nm790-with-heatsink-4tb-ssd-review/#respond Tue, 12 Mar 2024 12:00:29 +0000 https://www.kitguru.net/?p=639154 It's the same Lexar NM790, but this time with a dedicated heatsink - does it make a difference?

The post Lexar NM790 with Heatsink 4TB SSD Review first appeared on KitGuru.]]>
When we looked at the standard Lexar NM790, the temperatures the drive reached while benchmarking were a little concerning at times. Now we have the heatsink-equipped version of the drive to see if it makes a difference, testing the 4TB model that retails for £260 here in the UK.

Unlike the standard NM790 which comes in four capacities, the heatsink-equipped drive comes in just three; 1TB, 2TB and the flagship 4TB model, the 512GB drive gets dropped from the heatsink-equipped lineup.

Lexar's MN790 uses a 4-channel DRAM-less design controller from Maxiotech, the MAP1602A in combination with 232-Layer 3D TLC NAND. To improve performance the controller uses a 2,400MT/s NAND interface. Instead of using DRAM, the drive uses Host Memory Buffer (HMB) 3.0 technology (the drive uses a small portion of the system memory in place of a dedicated DRAM IC) along with Dynamic SLC caching.

Lexar quotes Sequential performance across the range as up to 7,400MB/s and up to 6,500MB/s for read and writes respectively. Although Lexar hasn't disclosed any random performance figures we have seen, the controller supports up to 1,000K IOPS for both read and writes.

The endurance of the 4TB drive is quoted as 3,000TBW and Lexar backs the drive with a 5-year warranty,

Physical Specifications:

  • Usable Capacities: 4TB.
  • NAND Components: 232-Layer 3D TLC.
  • NAND Controller: Maxiotech MAP1602A 4-channel.
  • Cache: none, Host Memory Buffer (HMB) 3.0.
  • Interface: PCIe Gen4 x4, NMVe 2.0.
  • Form Factor: M.2, 2280.
  • Dimensions: 80 x 24 x 9.7mm.
  • Drive Weight: 48.6g

Firmware Version: 12237.

Be sure to check out our sponsors store EKWB here

The post Lexar NM790 with Heatsink 4TB SSD Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/ssd-drives/simon-crisp/lexar-nm790-with-heatsink-4tb-ssd-review/feed/ 0
Endorfy Solum Voice S Microphone Review https://www.kitguru.net/peripherals/mat-mynett/endorfy-solum-voice-s-microphone-review/ https://www.kitguru.net/peripherals/mat-mynett/endorfy-solum-voice-s-microphone-review/#respond Mon, 11 Mar 2024 12:00:53 +0000 https://www.kitguru.net/?p=651063 Endorfy is adding to its microphone lineup with the release of the Solum Voice S

The post Endorfy Solum Voice S Microphone Review first appeared on KitGuru.]]>
Choosing the right mic can often be a confusing and complex process. Endorfy is aiming to make achieving great sounding mic audio a lot simpler with the release of the Solum Voice S, a plug and play USB condenser microphone that has onboard controls for everything you'll need. There's no software required or even available for this microphone, you just plug it in and away you go. Can this stripped-back approach to microphone design result in top tier audio quality?

Timestamps:
00:00 Start
00:38 No software! / pricing
01:50 The design / stand support
04:15 pop filter / foam filter
04:37 Sizing / build quality
07:37 Specifications
08:10 Sound analysis
11:01 Closing Thoughts

Specifications:

  • MICROPHONE TYPE – CONDENSER
  • COLOR – BLACK
  • DIMENSIONS – [MM] 170×74×74
  • CARDIOID – YES
  • BIT DEPTH – [B] 24
  • SAMPLING RATE – [KHZ] 96
  • FREQUENCY RANGE – [HZ] 30–18 000
  • POP FILTER INTERNAL – YES
  • POP FILTER EXTERNAL – YES
  • MOUNT TYPE – BASE
  • SHOCK MOUNT – NO
  • MUTE BUTTON – YES
  • HEADPHONE OUTPUT – 3.5 MM JACK
  • CONNECTIVITY – USB-C
  • CABLE LENGTH – 2 M
  • COMPATIBILITY – WINDOWS, MACOS, LINUX
  • WARRANTY [MONTHS] – 24

You cannot currently buy the Endorfy Solum Voice S in the UK but it is available on Amazon Germany HERE.

Discuss on our Facebook page HERE.

Pros:

  • Great sound quality.
  • No software required.
  • Sleek and simple design.
  • Silent and dampened bracket/stand.

Cons:

  • Plastic yoke/bracket feels cheap.
  • RGB options are very simple.

KitGuru says: The focus on simplicity has worked well for the Solum Voice S – it's capable of capturing great sounding speech without any faff.

Be sure to check out our sponsors store EKWB here

The post Endorfy Solum Voice S Microphone Review first appeared on KitGuru.]]>
https://www.kitguru.net/peripherals/mat-mynett/endorfy-solum-voice-s-microphone-review/feed/ 0
Fractal Design North XL Review https://www.kitguru.net/components/cases/leo-waldock/fractal-design-north-xl-review/ https://www.kitguru.net/components/cases/leo-waldock/fractal-design-north-xl-review/#respond Thu, 07 Mar 2024 14:00:21 +0000 https://www.kitguru.net/?p=650751 The Fractal Design North is back and it is bigger than ever - literally

The post Fractal Design North XL Review first appeared on KitGuru.]]>
Fractal Design's new North XL case carries over the wood highlights on the front panel that we saw on the original North at the end of 2022. When you factor in the extra size of the case that contributes the XL part of the name, we really had to fight the temptation to load the title of this review with a bunch of childish innuendo…

Time stamps
00:00 Start
00:45 Stripped down / eATX support
04:25 Features / cooling support
05:08 Hardware for the build
07:57 Adding the cooling / system build
12:05 Leo's thoughts and testing
15:36 Worth buying?

Main features

  • Enhance the look of your gaming station with sleek wood and alloy details.
  • Designed for E-ATX / ATX / mATX / mITX motherboards.
  • Enjoy natural ventilation through an open front and stylishly integrated mesh.
  • Choose a GPU up to 413 mm, or up to 380 mm with a 420 mm front radiator
  • Provide efficient CPU cooling with support for up to a 360mm top-mounted radiator with generous component clearance.
  • Get a head start on your build with the three included 140 mm Aspect PWM fans.
  • Slide open the side panels, unclip the front and use the integrated tab to pop off the top panel.
  • Make the most of your building experience with an intuitive interior layout.
  • Optimize cable management with expanded space for cable routing, additional tiedown points and more pass-through options.
  • Enjoy a sophisticated looking case which integrates effortlessly into your living space.

Specification:

  • Motherboard support: E-ATX, ATX, Micro-ATX, Mini-ITX.
  • Power supply support: ATX.
  • Expansion slots: 7.
  • Included fans: 3x 140mm Aspect 14 PWM 500-1,700rpm front intakes.
  • Fan mounts: 3x 120mm/140mm front, 2x 120mm/140mm side, 3x 120mm or 2x 140mm/180mm roof, 1x 120mm/140mm rear.
  • Radiator mounts: 360mm/420mm front, 360/280mm roof, 120mm/140mm rear.
  • 5.25-inch optical drive bays: None.
  • Internal drive bays: 2x 3.5-inch/2.5-inch, 2x 2.5-inch.
  • Front I/O ports: 2x USB 3.0 Type-A, 1x USB 3.1 Gen 2 Type-C, audio & mic.
  • Dimensions: 509mm H x 503mm D x 240mm W.

Testing

To put this case through its cooling paces we will be using a test system consisting of an AMD Ryzen 9 7950X , GeForce RTX 4080 and an SSD. This system allows us to produce a substantial amount of heat and effectively test the Fractal Design North XL's cooling capabilities.

Test System:

  • Processor: AMD Ryzen 9 7950X
  • Motherboard: Gigabyte X670E Aorus Xtreme
  • Memory: 32GB Corsair Dominator Titanium First Edition DDR5-6000
  • Graphics card: Gigabyte RTX 4080 Gaming OC 16GB
  • Power supply: FSP Hydro Ti Pro 850W Titanium ATX 3.0
  • SSD: Sabrent Rocket 4.0 M.2 NVMe
  • OS: Windows 11

Custom Loop Cooling

  • Pump/Reservoir: EK-XRES 100 DDC MX
  • CPU Block: Alphacool Core CPU Block
  • Radiator: Alphacool NexXxos ST30 280mm X Flow
  • Fans: be quiet! Silent Wings 4 140mm
  • Fittings: EK Quantum Torque STC 10mm/16mm
  • Coolant: Alphacool Ocool TecProtect Clear

In our testing the PC was drawing 675W at the wall socket with 325W going to our RTX 4080 graphics card and 220W to the Ryzen 9 7950X CPU. As we explain in our video, AMD drives their Zen 4 CPUs to 95 degrees C under load, and while our Ryzen 9 was running at an impressive 5.1GHz on all cores we had to deal with the case fans ramping up to their maximum speed of 1,700rpm. No matter how we set the fan curves, the CPU sat at 95 degrees C and the GPU at 65 degrees C.

Closing Thoughts

If you liked the look of the original Fractal Design North but wanted to install an E-ATX motherboard with more 140mm fans, you may well find the North XL is a decent choice.

We can see how Fractal has tweaked the design to add extra space while sticking to the original design aesthetic, but this necessarily means this 2024 case is already effectively 18 months old.

In many respects the design is absolutely fine and we like the use of the wood accents on the front panel to add extra style.

Where things get a bit questionable is the conventional layout with cooling in the front and top, along with the option of two fans in the rack next to the graphics card. You do not, however, have the option of mounting cooling in the side of the case next to the motherboard and that is quite restrictive when it comes to custom loop cooling.

You will be able to buy the Fractal Design North XL for £169-£175 inc VAT in the UK.

Discuss on our Facebook page HERE.

Pros:

  • Smart styling that uses unusual materials.
  • The three 140mm Aspect fans have PWM control.
  • Front I/O panel includes Gen 2 USB Type-C.
  • Decent range of storage options.

Cons:

  • No rear fan included.
  • PWM hub only controls four fans.
  • The case can get noisy when the fans ramp up.
  • The price seems a bit steep.

KitGuru says: The Fractal Design North XL could do with being XXL for custom loop cooling.

Be sure to check out our sponsors store EKWB here

The post Fractal Design North XL Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/cases/leo-waldock/fractal-design-north-xl-review/feed/ 0
NZXT Function 2 Keyboard Review https://www.kitguru.net/peripherals/mat-mynett/nzxt-function-2-keyboard-review/ https://www.kitguru.net/peripherals/mat-mynett/nzxt-function-2-keyboard-review/#respond Thu, 07 Mar 2024 08:37:27 +0000 https://www.kitguru.net/?p=648987 NZXT have updated their Function keyboard which originally released back in 2022

The post NZXT Function 2 Keyboard Review first appeared on KitGuru.]]>
NZXT released the original Function keyboard back in 2022 and are now updating their range with the release of the Function 2. This new model adds additional sound dampening material, 8000Hz polling rate and adjustable actuation among a slew of other improvements. On paper, the Function 2 is better in every way – but does this spec bump equate to a better real world experience?

Timestamps:

00:00 Start
00:41 The two sizes / keycaps
01:40 Adjustable actuation / other details
02:11 Pricing
02:49 Appearance / Design / Wrist rest
04:40 Lighting / Cases
05:39 Three extra buttons, a problem
06:02 Mats thoughts so far
06:39 Build quality and other concerns
08:36 Switches, stabilisers, keycaps and internals
10:02 Sound test
11:39 Does it sound good to you?
12:07 Real world experience
12:47 The 8000Hz polling rate debate
13:26 CAM Software
15:12 Are they worth buying?
16:44 NZXT sent us second samples after our problems

Specifications:

  • DIMENSIONS
    • MiniTKL – 338.5 x 123.4 x 40.3 mm
    • Fullsize – 442 x127.8 x 40.3 mm
  • WEIGHT
    • MiniTKL – 718g
    • Fullsize – 910g
  • ONBOARD MEMORY – YES
  • MEDIA KEYS – YES
  • STANDARD BOTTOM ROW – YES
  • WRIST REST
    • MiniTKL – NO
    • Fullsize – YES
  • KEYCAPS – Double shot Shine-Through PBT
  • POLLING RATE – Up to 8,000 Hz
  • TOP MATERIAL – 5000 Series Aluminum
  • N-KEY ROLLOVER – YES
  • ANTI-GHOSTING – YES
  • HEIGHT ADJUSTMENT – 2 Level
  • LIGHTING – Per-Key RGB
  • CONNECTIVITY – Wired (Detachable)
  • CABLE TYPE – Braided USB-C to USB-A
  • SYSTEM OS – Windows / Mac / Xbox / PlayStation

You can buy the NZXT Function 2 Keyboards directly from NZXT starting at £129.99 HERE.

Pros:

  • Nice design.
  • Minimal and subtle branding.
  • Up to 8000Hz polling.

Cons:

  • Glue applied to one of the internal cables, making disassembly very difficult.
  • Awful overall build quality.
  • Included switch puller damages paint when used on the white models.
  • Aluminium top case is fragile.
  • Poorly lubricated stabilisers.
  • Poor quality keycaps.

KitGuru says: While the specs do make for an improved keyboard on paper, in reality there are too many flaws for us to recommend the Function 2.

Be sure to check out our sponsors store EKWB here

The post NZXT Function 2 Keyboard Review first appeared on KitGuru.]]>
https://www.kitguru.net/peripherals/mat-mynett/nzxt-function-2-keyboard-review/feed/ 0
Cooler Master GM2711S Review (1440p 180Hz) https://www.kitguru.net/peripherals/james-morris/cooler-master-gm2711s-monitor-review-1440p-180hz/ https://www.kitguru.net/peripherals/james-morris/cooler-master-gm2711s-monitor-review-1440p-180hz/#respond Wed, 06 Mar 2024 12:00:34 +0000 https://www.kitguru.net/?p=645707 It's a 1440p 180Hz IPS monitor for £265 - we find out just how good it is

The post Cooler Master GM2711S Review (1440p 180Hz) first appeared on KitGuru.]]>
Cooler Master made its name with stylish chassis and potent cooling solutions (the clue is in the company name). But like many peripheral hardware and component manufacturers, the company has diversified, and even has a console in the works in partnership with KFC, of all brands. Cooler Master has also been making gaming monitors for a few years, and one of the latest is the GM2711S. With a 180Hz refresh and affordable price, it has clear potential.

The basic specification of the GM2711S is fairly pedestrian by today's standards. This is a 27in panel with the 2560 by 1440 resolution that is the sweet spot for this screen size. The technology used is “Ultra-Speed IPS”, which claims to improve the grey-to-grey response to 2ms, where 4ms is more typical for IPS. The MPRT response is 0.5ms. We've seen a few displays offering similar IPS technology, such as the Gigabyte M27Q with its SuperSpeed system. But it's still pleasing to encounter IPS quality with better response.

The maximum brightness of 350cd/m2 and 1,000:1 contrast are typical for IPS, however. Cooler Master only promises 99 per cent sRGB colour gamut, although DCI-P3 is specified as 90 per cent and Adobe RGB 91 per cent. There's VESA Display HDR400 support for gaming and media, which again is something we would expect. That just leaves the 180Hz refresh, which is ahead of most 27in screens with this resolution. Cooler Master partners this with “Adaptive Sync”, without saying whether this is compatible with AMD or NVIDIA graphics (it wouldn't be much use if it wasn't, though).

There's a fairly typical array of video inputs, including two HDMI 2.0 and one DisplayPort 1.4. The monitor has built-in stereo 2W speakers and a 3.5mm minijack audio output. However, there's another 3.5mm minijack for a headset, including microphone. The latter is driven via a USB Type B hub connection, but you only get one additional USB 2.0 port for attaching peripherals. Ergonomic adjustments are comprehensive, including tilt, raising, swivel and rotating into portrait orientation.

With all of this available for a reasonable £265, the GM2711S has potential as a mainstream gaming screen. Read on to find out if it delivers on its promise.

Specification:

  • Screen size: 27-inch, 16:9 aspect
  • Native resolution: 2,560 x 1,440
  • Curvature: None
  • Refresh rate: 180Hz, Adaptive Sync
  • Panel type: Ultra-Speed IPS
  • Contrast ratio: 1,000:1 (typical)
  • Brightness: 350cd/m2
  • Response time: 0.5ms MPRT, 2ms grey-to-grey
  • Display inputs: 2 x HDMI 2.0, DisplayPort 1.4
  • USB hub: Yes, USB Type B input, 1 x USB 2.0 outputs
  • Tilt: 5 degrees forward, 25 degrees backward
  • Raise: 130mm
  • Swivel: 45 degrees left and right
  • Portrait: Yes
  • Other: Audio output minijack, headset minijack, 2 x 2W stereo speakers

Retail Price: £264.98 (inc. VAT)

Be sure to check out our sponsors store EKWB here

The post Cooler Master GM2711S Review (1440p 180Hz) first appeared on KitGuru.]]>
https://www.kitguru.net/peripherals/james-morris/cooler-master-gm2711s-monitor-review-1440p-180hz/feed/ 0
Phanteks NV9 Review – 3 radiators and 12 fans, easy peasy! https://www.kitguru.net/components/cases/leo-waldock/phanteks-nv9-review-3-radiators-and-12-fans-easy-peasy/ https://www.kitguru.net/components/cases/leo-waldock/phanteks-nv9-review-3-radiators-and-12-fans-easy-peasy/#respond Mon, 04 Mar 2024 10:38:29 +0000 https://www.kitguru.net/?p=649748 This behemoth of a case can support a huge number of fans, but is it any good?

The post Phanteks NV9 Review – 3 radiators and 12 fans, easy peasy! first appeared on KitGuru.]]>
KitGuru has previously reviewed the Phanteks NV5 and NV7 cases, however nothing quite prepared us for the even larger Phanteks NV9. This behemoth of a case supports up to eleven 140mm fans or twelve 120mm fans along with three radiators. That said, it is not a workstation tower but instead sports elegant glass panels along with ARGB lighting. Let's find out what it can bring to the party.

Time stamps

00:00 Start
00:48 It's heavy! a close look
02:41 Cooling support
04:21 Flip and rear side – storage support
05:11 I/O Panel
05:46 RGB support
06:36 Hardware for the build
09:23 Cooling install
10:56 Wigidash
11:55 Thermal and Noise Testing
13:31 Leo’s Closing thoughts

Main features

  • Near-seamless glass panels for a perfect view of all your system components.
  • Unique layout with the mainboard at the centre and fans all around it.
  • Ultra-fine performance mesh design for high airflow with good dust filtration.
  • A total of twelve fan positions and simultaneously triple radiator support for high end cooling performance.
  • Revamped 2-channel D-RGB controller that is plug-and-play.
  • Adjustable GPU support bracket included.
  • Extensive cable management system behind the mainboard.
  • LED cover along the top and side edge of the mainboard to highlight the hardware components.
  • Optional Upgrade for US$60: NV9 Premium D-RGB Kit available with additional D-RGB lighting strips all around the case.

Specification:

  • Motherboard support: E-ATX up to 280mm wide, ATX, Micro-ATX, Mini-ITX
  • Power supply support: ATX
  • Expansion slots: 8
  • Included fans: None
  • Fan mounts: 3x 120mm/140mm roof, 2x 120mm/140mm rear, 3x 120mm/140mm floor, 3x 140mm/4x 120mm side
  • Radiator mounts: 360mm/420mm roof, 240mm/280mm rear, 360mm/420mm floor, 480mm/420mm side
  • 5.25-inch optical drive bays: None
  • Internal drive bays: 2x 3.5-inch/2.5-inch, 3x 2.5-inch
  • Front I/O ports: 2x USB 3.0 Type-A, 1x USB 3.2 Type-C, audio
  • Dimensions: 615mm (H) x 575mm (D) x 280mm (W)

Testing
To put this case through its cooling paces we will be using a test system consisting of an AMD Ryzen Threadripper 7970X CPU, Sapphire Radeon RX 6950 XT graphics and an SSD. This system allows us to produce a substantial amount of heat and effectively test the Phanteks NV9‘s cooling capabilities.

Test System

  • Processor: AMD Ryzen Threadripper 7970X
  • Motherboard: Gigabyte TRX50 Aero D rev 1.0
  • Memory: 64GB Kingston Fury Renegade Pro DDR5-5600 in Quad Channel
  • Graphics card: Sapphire Nitro+ Pure Radeon RX 6950 XT 16GB
  • Power supply: Phanteks Revolt X 1000W Platinum
  • SSD: Crucial T700 Pro PCIe 5.0
  • OS: Windows 11

Custom Loop Cooling

  • Pump/Reservoir: EK Quantum Kinetic TBE 300 D5 PWM
  • CPU Block: Watercool Heatkiller IV
  • Radiator: EK Quantum Surface X360M
  • Fittings: EK Quantum Torque STC-10/16
  • Soft Tube: Mayhems 10mm/16mm
  • Coolant: Thermaltake P1000 White

Thermal Testing

Thermal Testing Overview

We explain in our video how we tested the Phanteks NV9 with eleven 140mm be quiet! Silent Wings 4 fans that have a maximum speed of 1,100rpm and do indeed live up to their name by being lovely and quiet. Furthermore, the combination of 3DMark's Speedway Stress Test and Cinebench R23 means our test system was drawing 960W at the wall socket with 350W going to the CPU and 300W for the graphics card. Despite that horrendous level of abuse, the Phanteks NV9 performed like a champion and worked very well indeed.

Closing Thoughts

At first glance you might think the Phanteks NV9 is aimed at the workstation market but that rather misses the point. It is large enough to support any CPU or graphics card along with a huge amount of cooling, including up to three radiators installed at the same time. Heck the NV9 can accommodate a 280mm radiator in the rear (which is the limit of some small cases) and you still have space for two 420mm coolers.

Realisation dawned on us during the build that the Phanteks NV9 is geared towards clean design and in particular the way those glass panels butt together seamlessly in the front corner. It looks glorious but requires you to work hard on the details to keep everything neat and tidy. Then, when you finish your build, you'll have the task of lifting your PC into place. We recommend you ask a friend to assist as we guarantee it will weigh plenty.

You can buy the Phanteks NV9 for £199.99 from Overclockers UK HERE.

Discuss on our Facebook page HERE.

Pros:

  • Stylish good looks, especially where the glass panels come together.
  • Massive scope for air and liquid cooling.
  • Final price is much more reasonable than we expected.

Cons:

  • Front IO is down at the bottom of the case.
  • NV9 is supplied without any fans.
  • Cable management is tricky around the integrated RGB covers.
  • Very large and heavy.

KitGuru says: The Phanteks NV9 supports triple radiators and eleven 140mm fans!

Be sure to check out our sponsors store EKWB here

The post Phanteks NV9 Review – 3 radiators and 12 fans, easy peasy! first appeared on KitGuru.]]>
https://www.kitguru.net/components/cases/leo-waldock/phanteks-nv9-review-3-radiators-and-12-fans-easy-peasy/feed/ 0
DeepCool Mystique 360 AIO CPU Cooler Review https://www.kitguru.net/components/cooling/james-dawson/deepcool-mystique-360-aio-cpu-cooler-review/ https://www.kitguru.net/components/cooling/james-dawson/deepcool-mystique-360-aio-cpu-cooler-review/#respond Fri, 01 Mar 2024 11:32:03 +0000 https://www.kitguru.net/?p=649898 Can DeepCool top our charts with another AIO? This time we take a look at their latest LCD equipped cooler

The post DeepCool Mystique 360 AIO CPU Cooler Review first appeared on KitGuru.]]>
Whenever we review a DeepCool AIO, we are always amazed by its solid thermal performance and excellent value for money. But what happens when DeepCool adds an LCD screen to its AIO coolers? Does value for money go out of the window? Does a DeepCool AIO with an LCD suddenly become an expensive premium product? Fear not, because the Mystique AIO from DeepCool has all the features of a premium brand, without the high price tag, but can it still produce that chart-topping thermal performance? Let's find out.

Timestamps:

00:00 Start
00:50 Details and Pricing
01:51 A closer look at the cooler
04:25 Connections and cables
05:38 2.8 inch IPS LCD Screen
06:13 Fans are not RGB
06:53 Installation Discussion
08:27 Software Install
09:11 Thermal and noise testing
11:47 James Thoughts

DeepCool Mystique 360 Features:

  • Equipped with a pump top mounted 2.8 inch IPS LCD screen with 640 x 480 resolution to display system info, custom images and gifs, controlled by DeepCool DeepCreative software which is a simple yet intuitive control centre.
  • The LCD can automatically change orientation based on data collected from built-in gyroscopic sensors to ensure what's displayed on the screen is always the correct way up.
  • Mystique AIOs are fitted with DeepCool’s own 5th-generation high-performance pump featuring an efficient 3-phase, 6-slot, 4-pole motor.
  • The cooler is equipped with a redesigned cold plate with 0.1mm flow channels placed directly over CPU hot spots for maximum cooling performance.
  • The Mystique series comes with DeepCool FT12 SE Fans made from a durable PBT material with fluid dynamic bearing, PWM control and high static pressure.

Specifications:

  • CPU Socket Compatibility: Intel LGA1700/1200/1151/1150/1155, AMD AM5/AM4
  • Radiator Material: Aluminium
  • Radiator Dimensions: 402 × 120 × 27 mm
  • Radiator Tube Length: 410mm
  • Pump Speed: 3400 RPM ±10%
  • Pump Cold Plate: Micro Skived Copper
  • Pump Connector: 4-pin PWM
  • Pump Noise: 21dBA
  • Pump LED: 3-pin 5v ARGB LED
  • VRM Fan: N/A
  • Fan Dimensions: 120 × 120 × 25 mm
  • Fan LED: N/A
  • Fan Speed (PWM): 500-2150 RPM ±10%
  • Fan Max Airflow: 45 CFM
  • Fan Max Air Pressure: 32 mmAq
  • Fan Noise: ≤36.49dBA
  • Fan Bearing: Fluid Dynamic Bearing
  • Fan Connector: 4-pin PWM
  • Warranty: 5-Years

Be sure to check out our sponsors store EKWB here

The post DeepCool Mystique 360 AIO CPU Cooler Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/cooling/james-dawson/deepcool-mystique-360-aio-cpu-cooler-review/feed/ 0
Corsair M75 Wireless Mouse Review https://www.kitguru.net/peripherals/mat-mynett/corsair-m75-wireless-mouse-review/ https://www.kitguru.net/peripherals/mat-mynett/corsair-m75-wireless-mouse-review/#respond Thu, 29 Feb 2024 14:00:19 +0000 https://www.kitguru.net/?p=649928 The M75 Wireless is a new mouse from gaming brand Corsair. It features a fully ambidextrous design, with magnetically interchangeable side buttons

The post Corsair M75 Wireless Mouse Review first appeared on KitGuru.]]>
Corsair are adding the M75 Wireless to their extensive range of gaming mice. This time around, their new gaming peripheral aims to serve everyone, with the key feature being that it has magnetically attached, interchangeable side buttons. This makes the M75 Wireless a truly ambidextrous mouse.

Timestamps:
00:00 Start
00:36 Details / Pricing / Design
02:33 Side buttons
03:39 RGB is back
04:30 Underside / weight
05:12 Build quality
07:07 Sensor / switches / polling rate
08:31 Sound test
08:53 Connectivity / cable
09:28 Battery life
10:02 Real world gaming
10:58 Software support
12:50 Closing thoughts

Specifications:

  • Wireless Connectivity – Hyper-fast, sub-1ms 2.4GHz SLIPSTREAM CORSAIR WIRELESS TECHNOLOGY, Bluetooth® 4.2 + LE
  • Sensor – CORSAIR MARKSMAN
    • 26,000 DPI with 1 DPI resolution steps
    • 650 IPS tracking
    • up to 50G acceleration
  • Programmable Buttons – 5
  • Onboard Profiles – 1
  • Backlight – 2 zones
  • USB Report Rate – Up to 1,000Hz hyper-polling
  • Battery Charging – Charges via USB to computer
  • Battery Type – Built-in lithium-polymer, rechargeable
  • Battery Life
    • 2.4GHz SLIPSTREAM: 65hrs with RGB on
    • Bluetooth®: 120hrs with RGB on
    • 2.4GHz SLIPSTREAM: Up to 105hrs with RGB off
    • Bluetooth®: Up to 210hrs with RGB off.
  • Color – Black
  • Mouse Feet 100% PTFE
  • Wired Connectivity USB 2.0 Type-A (Type-C to Type-A cable)
  • Cable – 1.8m / 6ft
  • iCUE (Software) – Supported
  • Dimensions – 128(L) x 64.6(W) x 42(H) mm / 5.04”(L) x 2.56”(W) x 1.64”(H)
  • Weight – (w/o cable and accessories) 89g / 0.196 lbs
  • Warranty – Two years

You can buy the M75 Wireless Mouse directly from Corsair.

Pros:

  • Great for left handed users
  • Innovative side button switching
  • Good battery life
  • Good RGB

Cons:

  • Feels a little lost in the Corsair mouse lineup for right handed users
  • Scroll wheel has side to side play
  • Side buttons move slightly
  • Side buttons still click when blanked off

KitGuru says: If you're left handed and are specifically looking for a new Corsair mouse then it's definitely worth a look. However, if you're right handed, then some of the other options from Corsair just make more sense. 

 

Be sure to check out our sponsors store EKWB here

The post Corsair M75 Wireless Mouse Review first appeared on KitGuru.]]>
https://www.kitguru.net/peripherals/mat-mynett/corsair-m75-wireless-mouse-review/feed/ 0
Corsair 6500X Case Review https://www.kitguru.net/components/cases/james-dawson/corsair-6500x-case-review/ https://www.kitguru.net/components/cases/james-dawson/corsair-6500x-case-review/#respond Tue, 27 Feb 2024 14:00:56 +0000 https://www.kitguru.net/?p=648809 Corsair 6500 series aims to win over the dual chamber case enthusiasts, but has it worked?

The post Corsair 6500X Case Review first appeared on KitGuru.]]>
Corsair has dipped its toes in the dual chamber case market previously with the 280X, 680X and the Air 540. Today Corsair makes its return to dual chamber cases with the 6500 and 2500 series. This review looks at the larger 6500X with dual tempered glass panels, EATX and reverse connector motherboard support, including MSI Project Zero and Asus BTF. But can this new chassis compete with the likes of the Lian Li O11D series, the Hyte Y60/Y70 and the superb value of the Montech King 95?

Timestamps:

00:00 Start
00:56 6500 details / Pricing
02:30 Up close / teardown / front I/O
05:22 Inside the case / cooling support
06:54 Hardware support
08:20 Rear
09:32 Right hand side
11:20 Floor
12:35 Hardware for the build
14:42 Thermal performance
16:07 James spots some issues
18:03 Overall build quality
18:26 More annoyances
19:06 A few ideas for improvement
21:04 Sign off

Corsair 6500X Features:

  • The 6500 series gives the user the option to choose between airflow and glass configurations, Corsair also offers several optional accessories for the 6500 series including alternate material outer panels, vertical GPU mount and a RapidRoute cable management kit.
  • It supports reverse connector motherboards including designs from MSI Project Zero and Asus BTF.
  • 6500 series is equipped with a robust steel frame, great cooling options, multiple cutouts and cable routing options and a range of accessories to suit specific build requirements such as vertical GPU mounts and riser cables.
  • The 6500X showcases the build behind two tempered glass side panels while the 6500D switches the focus to optimal airflow and cooling with a front mesh setup and an additional front radiator/fan mount.
  • All 6500 series cases are made for Corsair iCUE link components with compatible iCUE Link cable hooks built into the chassis to simplify cable routing.

Specifications:

  • Case Type: ATX Dual Chamber
  • Dimensions: 481 x 328 x 496 mm
  • Material: Steel, Tempered Glass
  • Motherboard Support: EATX, ATX, MATX, ITX
  • Expansion Slots: 8 Horizontal
  • Storage Bays: 2 x 2.5”, 2 x 3.5”
  • Max GPU Length: 400mm
  • Max CPU Cooler Height: 190mm
  • Max PSU Size: ATX 225mm long
  • Fan Support: 3 x 120/140mm (Top) 3 x120/140mm (Floor) 3 x 120mm (Side) 1 x 120/140mm (Rear)
  • Pre-installed fans: N/A
  • Radiator Support: 360/280/240mm (Top) 360/280/240mm (Floor) 360/240mm (Side) 120/140mm (Rear)
  • Dust Filters: Floor/Right side
  • Font I/O: 4 x USB 3.2 Gen1 Type-A, 1 x USB 3.2 Gen2 Type-C, Combined 3.5mm Audio Jack, Power and Reset Buttons

Thermal Performance Testing

To simulate thermal demand we run the Cinebench R23 multi-thread benchmark and 3DMark Speed Way stress test simultaneously in a loop for 30 minutes to load the system fully. This gives the CPU and GPU enough time to reach constant steady-state temperature. With this data, we can compare how the system handles the thermal demand and measure peak noise levels.

Thermal performance is measured with the case in various configurations, such as the default, with the tempered glass left-hand side panel removed and with the front panel removed to see how these configurations affect the CPU and GPU temperature. During testing, only stock case fans are used unless otherwise specified. All water pumps are set to maximum RPM and fans are set to a custom RPM curve by the Motherboard software/BIOS.

All temperature measurements are presented as Deltas – meaning the ambient temperature has been deducted from the CPU temperature giving us a Delta. Data shown in the charts represent the average component temperature over the length of the test as measured by HWiNFO and then the last 15 minutes of the data are calculated to get the average. The ambient temperature during thermal tests is between 20-22⁰C.

Test System Specification:

Thermal Performance Overview

We tested the case in several configurations with case fans set at a fixed rpm and the AIO cooler fans running the extreme profile in iCUE.

In either configuration, both the CPU and GPU temperatures are consistent. Removing the TG side panel did not affect the CPU or GPU temperature but there is a small reduction in CPU temperature with the top panel and dust filters removed which might suggest the top panel is a little airflow restrictive but it's of no major concern.

The CPU package power was a little higher in this configuration since the CPU frequency increased slightly due to the cooler CPU temperature.

Temperatures are right on what we would expect from this CPU and GPU combination in a good airflow case.

Noise Output

Similar to thermal performance, removing panels had little effect on noise output. Only a small increase in noise is noticed when removing the side glass panel. The noise output will all depend on how you configure your fan speeds in this case as there are no noise-reducing features built into the case panels so optimising fan curves manually to suit your noise requirements is key.

Closing Thoughts

If Corsair intended to win over dual chamber case enthusiasts with the 6500X then in terms of looks, thermals and hardware support it is mission accomplished. The 6500 series supports EATX motherboards including reverse connector designs such as MSI Project Zero and Asus BTF, graphics cards up to 400mm long a huge amount of cooling options, while it also feels like a very well-built case in most areas. Hardcore Corsair fans will love it, no doubt.

The thing is, there are better dual chamber chassis on the market already such as the Lian Li 011D Evo with its superb modular features and the Montech King 95 which offers amazing value for money. Corsair has been very conservative with the design of the 6500X, other than the reverse connector compatible motherboard tray, it doesn’t provide any new or innovative modular features, even removable fan/radiator mounts are missing from the case floor and roof.

Removable fan brackets would have come in very handy during our test system build as it would allow more space needed to connect iCUE link cables, which is a fiddly process once the fans are screwed to the case. There are a few other shortcomings noticeable when installing a system in the case such as the power supply interfering with the removal and installation of the HDD caddy, but other than a couple of minor issues it's pretty easy to build with this case.

I also think that in this day and age, with rising CPU package power and the heat that comes with it, it would have been wise for Corsair to add support for 420mm radiators in the 6500X – and for someone who has a keen eye for detail, 140mm fan support on the side mount wouldn’t go amiss, too. Another annoyance with the 6500 series is that Corsair has made cable management an optional extra with the “RapidRoute” kit purchasable separately, a common feature of even budget cases which should be included as standard.

However, the Corsair 6500X produces decent thermal performance, it integrates well with iCUE link hardware being equipped with features ready for potential future desktop products and it is a good-looking case that is pretty easy to build with. It's just that the design is a little conservative, it's missing vital features which makes you feel that you are not quite getting as much for your money as the alternatives, and it leaves you wanting more.

The Corsair 6500X is available to purchase now at OverclockersUK priced at £179.99 HERE.

Pros:

  • Solid thermal performance.
  • Good looks.
  • Plenty of space to work with.
  • Huge hardware support.

Cons:

  • It's a little expensive for what it is.
  • Some optional accessories should be included.
  • Lack of 140mm side fan support.
  • Missing simple features like removable fan brackets on the floor and roof.

KitGuru says: If you like dual chamber cases and are a fan of Corsair you will love the 6500 series no doubt, but for everyone else there are other options to consider which might give you more for your money.

Be sure to check out our sponsors store EKWB here

The post Corsair 6500X Case Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/cases/james-dawson/corsair-6500x-case-review/feed/ 0
AMD RX 7900 GRE Review https://www.kitguru.net/components/graphic-cards/dominic-moass/amd-rx-7900-gre-review/ https://www.kitguru.net/components/graphic-cards/dominic-moass/amd-rx-7900-gre-review/#respond Mon, 26 Feb 2024 14:00:29 +0000 https://www.kitguru.net/?p=648610 Seven months on from its China-exclusive launch, AMD's RX 7900 GRE is finally hitting the global market

The post AMD RX 7900 GRE Review first appeared on KitGuru.]]>
I have to be honest, today's review was not something I had on my radar in 2024. That's because we're taking a look at AMD's RX 7900 GRE graphics card, a product which first launched as an exclusive for the Chinese DIY market last July, before it eventually worked its way into the hands of system integrators. Today, however, AMD is announcing the worldwide availability of this GPU, alongside a new $549 price tag. We put it to the test and find out how it stacks up against the competition.

To put AMD's RX 7900 GRE into context, this GPU launched all the way back in July 2023 to little fan-fare, given it was originally sold as a China exclusive. That also explains the name, with GRE standing for Golden Rabbit Edition, as 2023 was the Year of the Rabbit. It's slightly ironic then that worldwide availability is happening now in 2024, the Year of the Dragon, but we digress… After its initial launch, the 7900 GRE began to be sold via system integrators in certain prebuilt PCs, and I even reviewed one such system from Cyberpower last November. Up until now though, it was only officially launched for the DIY market in China.

That changes today as AMD has announced worldwide availability for the RX 7900 GRE while also adjusting its price, given it first launched at $649 last year but will now be sold for $549. Clearly AMD feels it is well positioned to take on Nvidia's RTX 4070 Super, a product which has put significant pressure on AMD's Radeon division in the mid-range market segment since it launched last month.

In today's review then, we assess the RX 7900 GRE in its reference form, comparing it against a whole heap of products from both AMD and Nvidia, looking at rasterisation performance, ray tracing, power draw, efficiency and more…

If you want to read this review as a single page, click HERE.

RX 7900 XTX RX 7900 XT RX 7900 GRE RX 7800 XT RX 7700 XT
Architecture RDNA 3 RDNA 3 RDNA 3 RDNA 3 RDNA 3
Manufacturing Process 5nm GCD + 6nm MCD 5nm GCD + 6nm MCD 5nm GCD + 6nm MCD 5nm GCD + 6nm MCD 5nm GCD + 6nm MCD
Transistor Count 57.7 billion 57.7 billion 57.7 billion 28.1 billion 28.1 billion
Die Size  300 mm² GCD

220 mm² MCD

300 mm² GCD

220 mm² MCD

300 mm² GCD

220 mm² MCD

200 mm² GCD

150 mm² MCD

200 mm² GCD

150 mm² MCD

Compute Units 96 84 80 60 54
Ray Accelerators 96 84 80 60 54
Stream Processors  6144 5376 5120 3840 3456
Game GPU Clock Up to 2300MHz Up to 2000 MHz 1880 MHz 2124 MHz 2171 MHz
Boost GPU Clock Up to 2500 MHz Up to 2400 MHz Up to 2245 MHz Up to 2430 MHz Up to 2544 MHz
ROPs 192 192 192 96 96
AMD Infinity Cache 96MB 80MB 64MB 64MB 48MB
Memory 24GB GDDR6 20GB GDDR6 16GB GDDR6 16GB GDDR6 12GB GDDR6
Memory Data Rate 20 Gbps 20 Gbps 18 Gbps 19.5 Gbps 18 Gbps
Memory Bandwidth 960 GB/s 800 GB/s 576 GB/s 624 GB/s 432 GB/s
Memory Interface  384-bit 320-bit 256-bit 256-bit 192-bit
Board Power  355W 315W 260 W 263W 245W

First, let's take a quick look at the specs. The RX 7900 GRE is using the same Navi 31 die that we first saw with the RX 7900 XTX and 7900 XT, but it has been significantly cut-down. Still, using the same die means we find a 300mm² Graphics Compute Die, based on TSMC's 5nm node, flanked by six 37mm² Memory Cache Dies (though two are disabled for the 7900 GRE). In total, the Navi 31 GPU packs 57.7 billion transistors.

While a full Navi 31 GPU packs in 96 Compute Units, the 7900 GRE is cut down to 80 CUs, 4 fewer than the 7900 XT, and each CU houses 64 Steam Processors, for a total of 5120 shaders. There's also 80 Ray Accelerators – one per CU – and 192 ROPs.

As for clock speed, AMD has de-coupled the clocks, so the front-end and shaders can operate at different clock speeds in a bid to save power. With the RX 7900 GRE, the shader clock features a rated game clock of up to 1880MHz, and a boost of up to 2245MHz, so that is a reduction of about 7% compared to the 7900 XT.

The memory configuration is where we see the biggest change compared to the 7900 XT, however. With two of the six MCDs disabled, the RX 7900 GRE packs 16GB of GDDR6 memory clocked at 18Gbps, operating over a 256-bit memory interface, for total memory bandwidth of 576 GB/s. 64MB of Infinity Cache is also present, which allows AMD to claim an ‘effective memory bandwidth' of up to 2265.6 GB/s.

Power draw for the RX 7900 GRE is also rated at 260W Total Board Power (TBP), but we are using our updated GPU power testing methodology in this review, so read on for our most detailed power and efficiency testing yet.

Be sure to check out our sponsors store EKWB here

The post AMD RX 7900 GRE Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/graphic-cards/dominic-moass/amd-rx-7900-gre-review/feed/ 0
Philips Evnia 49M2C8900 Review (240Hz QD-OLED Super Ultrawide) https://www.kitguru.net/peripherals/dominic-moass/philips-evnia-49m2c8900-review-240hz-qd-oled-super-ultrawide/ https://www.kitguru.net/peripherals/dominic-moass/philips-evnia-49m2c8900-review-240hz-qd-oled-super-ultrawide/#respond Fri, 23 Feb 2024 11:00:28 +0000 https://www.kitguru.net/?p=647430 It's an absolute beast, offering a 49inch 24-Hz QD-OLED panel

The post Philips Evnia 49M2C8900 Review (240Hz QD-OLED Super Ultrawide) first appeared on KitGuru.]]>
2024 looks set to be a huge year for OLED gaming monitors, as pretty much every major brand announced new screens based on either LG's WOLED or Samsung's QD-OLED panels back at CES 2024. The Philips Evnia 49M2C8900 was announced slightly earlier, at the tail-end of 2023, but is still jaw-dropping thanks to its second-gen QD-OLED 49in 5120×1440 super ultrawide panel. Oh, and did we mention it's 240Hz?

There's no two ways about it, the Philips Evnia 49M2C8900 is an absolute spec monster. The idea of a 240Hz OLED alone is enough to get me interested, and that's before we get to the fact this is a second generation Samsung QD-OLED panel, promising increased brightness, better text legibility thanks to the tweaked sub-pixel structure, as well as improved black levels in bright conditions.

Factor in the monster 49in size, with the 5120×1440 resolution, peak brightness of up to 1000 nits, alongside near-instant response times, and there's really not much more to say – so let's get on with the review!

Specification:

  • Panel Size: 48.9 inch / 124.3 cm
  • Effective viewing area: 1196.7 (H) x 339.2 (V) – at a 1800R curvature*
  • Display Screen coating: Anti-reflection, 2H
  • Aspect Ratio: 32:9
  • Response time (typical): 0.03 ms (Grey to Grey)*
  • Contrast ratio (typical): 1,500,000:1
  • Pixel Pitch: 0.233 x 0.233 mm
  • Viewing Angle: 178º (H)/178º (V); @ C/R > 10
  • Display colours: Colour support 1.07 billion colours (10-bit)
  • Scanning Frequency: 30 – 388 kHz (H) / 48 – 240 Hz (V)
  • sRGB: Yes
  • Picture enhancement: SmartImage game
  • Pixel Density: 108.77 PPI
  • Flicker-free: Yes
  • LowBlue Mode: Yes
  • EasyRead: Yes
  • AMD FreeSync™ technology: Premium Pro
  • Delta E: < 2 (sRGB)
  • Maximum Resolution: 5120 x 1440 @ 240 Hz
  • Low Input Lag: Yes
  • Ambiglow: 3 sided
  • G-SYNC: Compatible 50 Hz ~ 240 Hz*
  • Monitor panel type: QD OLED
  • Pixel format: RGB Q-Stripe*
  • Brightness (nits): SDR: 250 (APL 100%) nit, HDR: 450 (APL 10%) nit, HDR E/P: 1000 (APL 3%)
  • SmartContrast: Mega Infinity DCR
  • Colour Gamut (typical): NTSC 127.4%*, sRGB 153.1%*, Adobe RGB 125.2%*
  • Colour Gamut (min.): DCI-P3: 99%*
  • HDR: DisplayHDR True Black 400 certified
  • KVM: Yes
  • USB Hub: USB version 3.2 Gen1 / 5 Gbps, USB-B upstream x 1, USB-A downstream x 4 (with 2 for fast charge B.C 1.2)
  • Signal input: HDMI 2.1 x 2, DisplayPort 1.4 x 1, USB-C x 1 (DP Alt mode, Power Delivery)
  • Output Power: 30 W, 2.2 Channel
  • Sound Enhancement: DTS Sound
  • Speaker Configuration: 7.5 W x 2 tweeters, 7.5 W x 2 woofers with flow port
  • Height adjustment: 120 mm
  • Tilt: -5/15 degree
  • Swivel: -/+ 20 degree

Firmware tested: V1.02

Be sure to check out our sponsors store EKWB here

The post Philips Evnia 49M2C8900 Review (240Hz QD-OLED Super Ultrawide) first appeared on KitGuru.]]>
https://www.kitguru.net/peripherals/dominic-moass/philips-evnia-49m2c8900-review-240hz-qd-oled-super-ultrawide/feed/ 0
Cooler Master GX III 850W ATX V3.0 PSU Review https://www.kitguru.net/components/power-supplies/zardon/cooler-master-gx-iii-850w-atx-v3-0-psu-review/ https://www.kitguru.net/components/power-supplies/zardon/cooler-master-gx-iii-850w-atx-v3-0-psu-review/#respond Thu, 22 Feb 2024 12:00:34 +0000 https://www.kitguru.net/?p=648801 Should this unit tempt you for a new system build this year? We find out today

The post Cooler Master GX III 850W ATX V3.0 PSU Review first appeared on KitGuru.]]>
It has been some time since I last looked at a Cooler Master power supply so I am interested to see what their latest GX III 850W unit brings to the table. This current model is a fully modular power supply with an 80 Plus Gold rating, with the 850W version on sale for £130 in the UK.

In their literature for the product, Cooler Master claim that this product offers a new structural design, improved airflow, and a ‘cleaner' overall look. In their words it is the ‘epitome of strength in elegance'. Interestingly their guides also claim that the heatsinks inside are anodic coated to reduce temperatures by 5c compared to a traditional heatsink. I don't think I have ever heard that before.

Cooler Master GX III Overview:

  • ATX Version ATX 12V Ver. 3.0
  • PFC Active PFC
  • Input Voltage 100 – 240V
  • Input Current 10 – 5A
  • Input Frequency 50 – 60Hz
  • Dimensions (L x W x H) 160 x 150 x 86mm
  • Fan Size 135 mm
  • Fan Bearing HDB
  • Fan Speed 1900rpm
  • Efficiency ≥ 90% @ Typical Load
  • 80 PLUS Rating 80 PLUS Gold
  • ErP 2014 Lot 3 Yes
  • Operating Temperature 0 ~ 50℃
  • Power Good Signal 100 – 150 ms
  • Hold Up Time ≥ 16ms
  • MTBF >100,000 hours
  • Warranty 10 years

Be sure to check out our sponsors store EKWB here

The post Cooler Master GX III 850W ATX V3.0 PSU Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/power-supplies/zardon/cooler-master-gx-iii-850w-atx-v3-0-psu-review/feed/ 0
NZXT Lift 2 Mouse Review (Ergo + Symm) https://www.kitguru.net/peripherals/mat-mynett/nzxt-lift-2-mouse-review-ergo-symm/ https://www.kitguru.net/peripherals/mat-mynett/nzxt-lift-2-mouse-review-ergo-symm/#respond Wed, 21 Feb 2024 16:00:59 +0000 https://www.kitguru.net/?p=648849 NZXT is revamping its gaming mice line-up with the release of the Lift 2

The post NZXT Lift 2 Mouse Review (Ergo + Symm) first appeared on KitGuru.]]>
NZXT released their first gaming mouse, the Lift, back in 2022. They have now revamped the design with the release of the Lift 2. On paper, the new model improves on the original in almost every way, featuring a lightweight design, up to 8000Hz polling rate and two distinct shapes. The Lift 2 Symm has a symmetrical and compact body, while the Lift 2 Ergo has a right handed, ergonomic and contoured design. Can these new mice from NZXT perform better than the first generation models?

Timestamps:

00:00 Start
00:46 Lift 2 details
02:47 Pricing and colours
03:54 Design
05:42 No RGB?
06:03 Cable quality
06:57 Build quality
08:05 Pre and post travel / sound tests
08:55 Sensor and switches
09:46 Real world use
10:52 Polling rate
11:15 NZXT Cam Software
12:32 Mat’s closing thoughts

Specifications:

Lift 2 Symm

  • Form Factor – Symmetrical
  • Polling Rate – Up to 8,000 Hz
  • Switch Type – Optical
  • Click Lifetime – 100 Million
  • Mouse Feet – 100% PTFE
  • Programmable Buttons – Yes
  • Onboard Memory – Yes
  • RGB Lighting – No
  • Sensor – PixArt PMW3395
  • Sensor Type – Optical
  • Max Resolution – 26,000 DPI
  • Max Acceleration – 50g
  • Max Speed – 650 IPS
  • Cable Length – 2 m / 6.56 ft
  • Cable Material – Paracord
  • Connection – USB 2.0
  • Weight – 58g
  • Length – 126.8 mm / 4.99 in
  • Width – 67.1 mm / 2.64 in
  • Height – 38.3 mm / 1.51 in

Lift 2 Ergo

  • Form Factor – Ergonomic
  • Polling Rate – Up to 8,000 Hz
  • Switch Type – Optical
  • Click Lifetime – 100 Million
  • Mouse Feet – 100% PTFE
  • Programmable Buttons – Yes
  • Onboard Memory – Yes
  • RGB Lighting – No
  • Sensor – PixArt PMW3395
  • Sensor Type – Optical
  • Max Resolution – 26,000 DPI
  • Max Acceleration – 50g
  • Max Speed – 650 IPS
  • Cable Length – 2 m / 6.56 ft
  • Cable Material – Paracord
  • Connection – USB 2.0
  • Weight – 60g
  • Length – 128.4 mm / 5.06 in
  • Width – 65.1 mm / 2.56 in
  • Height – 41.4 mm / 1.63 in

You can buy both models of the NZXT Lift 2 Gaming Mice directly from NZXT HERE.

Discuss on our Facebook page HERE.

Pros:

  • Matte finish doesn’t attract fingerprints.
  • Lighter than the original.
  • Up to 8000Hz polling rate.
  • Good feature set for the price.
  • Lack of RGB.

Cons:

  • 8000Hz polling rate is overkill for most people.
  • Inconsistencies in scroll wheel across the two shapes.
  • Non-detachable cable.
  • Lack of RGB.

KitGuru says: The Lift 2 gaming mice are a good improvement over the original Lift. The build has been improved overall but some inconsistencies in the scroll wheels across our two review units did slightly disappoint. The increase in polling up to 8000Hz is nice to see at the £53 price point. Overall, this is a step in the right direction for NZXT and the Lift 2 delivers a lot of features for a relatively low cost.

Be sure to check out our sponsors store EKWB here

The post NZXT Lift 2 Mouse Review (Ergo + Symm) first appeared on KitGuru.]]>
https://www.kitguru.net/peripherals/mat-mynett/nzxt-lift-2-mouse-review-ergo-symm/feed/ 0
Arctic Liquid Freezer III 360 ARGB CPU Cooler Review https://www.kitguru.net/components/cooling/james-dawson/arctic-liquid-freezer-iii-360-argb-white-aio-cpu-cooler-review/ https://www.kitguru.net/components/cooling/james-dawson/arctic-liquid-freezer-iii-360-argb-white-aio-cpu-cooler-review/#respond Tue, 20 Feb 2024 18:00:11 +0000 https://www.kitguru.net/?p=647670 Arctic Is launching a new AIO but can it beat the legendary Liquid Freezer II?

The post Arctic Liquid Freezer III 360 ARGB CPU Cooler Review first appeared on KitGuru.]]>
The product we have for review today is possibly the most important new liquid CPU cooler to launch this year. The Arctic Liquid Freezer II was and still is a very popular choice with enthusiasts due to its solid thermal performance, low noise and affordable price. But Arctic has now launched its successor, the Liquid Freezer III. In this review, we take a look at the new Liquid Freezer III 360 ARGB White and put it to the test on both our AMD and Intel CPU cooler test benches to see what improvements Arctic has made with this new model.

Timestamps:

00:00 Start
00:45 Version 3 and changes
03:34 A closer look
07:17 Mounting / support – accessories
09:26 Thermal Performance on Intel / AMD
12:52 Noise output
13:18 So is it any good?
15:08 Closing Thoughts

Arctic Liquid Freezer III 360 ARGB Features:

  • Available in black or white colour schemes and in several radiator sizes including 420mm, 360mm, 280 and 240mm to suit any CPU spec.
  • The CPU block is equipped with an improved copper cold plate with increased fin volume and water channels optimised for maximum heat dissipation.
  • An improved VRM fan that is larger and has an adaptive speed range of between 400 – 2500 RPM.
  • A 38mm thick aluminium radiator featuring an increased fin stack and pre-installed 120mm Arctic P series ARGB high static pressure fans.
  • The Intel socket mount includes an LGA1700 contact frame to ensure the CPU is evenly locked in the socket for improved contact with the CPU cooler base.
  • Two included connecting cables allow users to individually connect the fan, pump and VRM for independent control or an all-in-one connector allows control of the whole unit via a single motherboard fan header.

Specifications:

  • CPU Socket Compatibility: Intel LGA1700 and AMD AM5/AM4
  • Radiator Material: Aluminium
  • Radiator Dimensions: 398 (L) x 120 (W) x 38 (H) mm
  • Pump: 800–2800 rpm (PWM controlled)
  • Pump Cold Plate: Copper, Micro Skived Fins
  • VRM Fan: 400–2500 rpm (PWM controlled)
  • Fan Dimensions: 120mm x 120mm x 25mm
  • Fan LED: 3-pin 5V ARGB
  • Fan Speed (PWM): 200 – 2000 rpm
  • Fan Max Airflow: 82 cfm | 82.91 m³/h
  • Fan Max Air Pressure: 85 mmH2O
  • Fan Bearing: Fluid Dynamic Bearing
  • Fan Connector: 4-pin PWM
  • Warranty: 6 Years

Be sure to check out our sponsors store EKWB here

The post Arctic Liquid Freezer III 360 ARGB CPU Cooler Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/cooling/james-dawson/arctic-liquid-freezer-iii-360-argb-white-aio-cpu-cooler-review/feed/ 0
Corsair K65 Plus Wireless 75% Keyboard Review https://www.kitguru.net/peripherals/mat-mynett/corsair-k65-plus-wireless-75-keyboard-review/ https://www.kitguru.net/peripherals/mat-mynett/corsair-k65-plus-wireless-75-keyboard-review/#respond Tue, 20 Feb 2024 14:00:00 +0000 https://www.kitguru.net/?p=648676 Corsair's K65 Plus Wireless is a 75% gaming keyboard with a focus on typing feel and acoustics

The post Corsair K65 Plus Wireless 75% Keyboard Review first appeared on KitGuru.]]>
Corsair has added to its extensive line-up of peripherals with the release of the K65 Plus Wireless. Featuring a 75% layout, factory lubed switches and stabilisers alongside a focus on the core aspects of a keyboard, this new board aims to improve previous products where it matters most. Let's take a closer look to see if that's true…

Timestamps:

00:00 Start
00:32 info and pricing
02:16 Appearance / Keys / ports & switches
03:40 RGB Lighting
04:43 Board design and shape
05:17 Build quality and weight
06:24 Keycaps / switches
07:17 Hot-swappable / Holy Panda X / sound test
08:35 Mat’s thoughts so far
11:01 Polling rate discussion
11:25 Key shortcuts
12:24 Wireless / battery
13:44 iCUE Software
15:30 Closing thoughts

Specifications:

  • Form Factor – 75%
  • Chassis – PC+ Steel plate
  • Mounting Style – Top mount
  • Sound absorbing foam – High density foam + Silicon pad
  • Colorway – Black/ Gray
  • Keycaps – Dye-sub PBT single shot
  • Backlighting – Individually LED lit and per-key programmable
  • LED – Color RGB
  • Keyswitches – CORSAIR MLX Red linear mechanical switches, 45g actuation force, 1.9mm actuation distance, 4mm total travel, guaranteed for 70 million keystrokes
  • Hot-swappable – Yes
  • Connectivity – 2.4GHz/BT/1 x USB 3.0 Type-A
  • Battery Life – 266 hours with backlighting off
  • Matrix – Full key rollover (NKRO) with 100% anti-ghosting
  • USB Report Rate – Up to 1,000Hz hyper-polling
  • On-Board Profiles – 4
  • Media Control – FN shortcuts
  • Brightness Control – FN shortcuts/Rotary dial
  • Windows Lock Key – FN shortcut
  • Adjustable Height – Yes
  • Palm Rest – No
  • Plug and Play Operation – Yes
  • Console Compatibility – Xbox One, Xbox Series X|S, PlayStation 4,5
  • Cable – 1.8 m / 6 ft, USB Type-C to Type-A, detachable, black, tangle-free rubber
  • Dimensions – 320(L) x 136(W) x 35(H) mm / 12.59(L) x 5.35(W) x 1.37(H) in
  • Weight – 0.918kgs / 2.02 lbs
  • Warranty Two years – Local country regulations are applicable

You can buy the Corsair K65 Plus Wireless directly from Corsair for £149.99 HERE.

Discuss on our Facebook page HERE.

Pros:

  • Great typing sound.
  • Good build quality.
  • Comfortable typing experience.
  • Vastly improved stabilisers over previous Corsair keyboards.
  • Stylish, retro like design.

Cons:

  • All-plastic build.
  • Slight wobble on the dial.

KitGuru says: This is the best keyboard Corsair have produced for quite some time. The improvements to typing feel and acoustics are remarkable, especially in the stabiliser rattle and spacebar sound.

Be sure to check out our sponsors store EKWB here

The post Corsair K65 Plus Wireless 75% Keyboard Review first appeared on KitGuru.]]>
https://www.kitguru.net/peripherals/mat-mynett/corsair-k65-plus-wireless-75-keyboard-review/feed/ 0
Corsair MP600 Elite with Heatsink 2TB Review https://www.kitguru.net/components/ssd-drives/simon-crisp/corsair-mp600-elite-with-heatsink-2tb/ https://www.kitguru.net/components/ssd-drives/simon-crisp/corsair-mp600-elite-with-heatsink-2tb/#respond Mon, 19 Feb 2024 12:00:02 +0000 https://www.kitguru.net/?p=647034 It's a new high-end PCIe Gen4 from Corsair and we put it to the test

The post Corsair MP600 Elite with Heatsink 2TB Review first appeared on KitGuru.]]>
The latest addition to Corsair's MP600 range of Gen 4 SSDs is the MP600 Elite. Using a combination of the latest Phison 4-channel controller and 162-layer NAND, the drive is available in three versions. We analyse the 2TB model, retailing for around £160 here in the UK.

At launch, the MP600 Elite range comprises just two capacities, 1TB and 2TB, but Corsair plans to release a 4TB flagship version in April '24. The drive is available in three versions, standard, with an integrated heatsink (the model we are looking at) and a PS-5 compatible model.

At the heart of the drive is a Phison PS5027-E27T controller which looks after Kioxia BiCS6 162-layer TLC NAND. Phison's PS5027-E27T is a 4-channel DRAM-less design controller which can support up to 8TB of 3D TLC or QLC NAND at transfer speeds up to 3600MT/s.

The Sequential performance for the 2TB model is quoted as up to 7,000MB/s and up to 6,500MB/s for read and writes respectively while the 1TB drive has the same read figure as the 2TB drive but is slightly slower when it comes to writes at up to 6.200MB/s.

Corsair rates the 4K random performance of the 2TB MP600 Elite as up to 1,000,000 IOPS for reads and up to 1,200,000 IOPS for writes. The 1TB drive has the same read figure but with writes at up to 1,000,000 IOPS.

The 2TB drive has a TBW endurance rating of 1200TB and the 1TB drive 600. Corsair backs the drives with a 5-year warranty.

Physical Specifications:

  • Usable Capacities: 2TB.
  • NAND Components: Kioxia BiCS6 162-layer TLC NAND.
  • NAND Controller: Phison PS5027-E27T.
  • Cache: None, uses HMB (Host Memory Buffer) technology.
  • Interface: PCIe Gen 4 x4, NVMe 1.4.
  • Form Factor: M.2, 2280.
  • Dimensions: 24 x 80 x 9mm.
  • Drive Weight: 32g.

Firmware Version: ERFM11.0

Be sure to check out our sponsors store EKWB here

The post Corsair MP600 Elite with Heatsink 2TB Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/ssd-drives/simon-crisp/corsair-mp600-elite-with-heatsink-2tb/feed/ 0
Gigabyte Aorus 16X (2024) Review w/ 14900HX & RTX 4070 https://www.kitguru.net/lifestyle/mobile/laptops/dominic-moass/gigabyte-aorus-16x-2024-review-w-14900hx-rtx-4070/ https://www.kitguru.net/lifestyle/mobile/laptops/dominic-moass/gigabyte-aorus-16x-2024-review-w-14900hx-rtx-4070/#respond Fri, 16 Feb 2024 12:00:29 +0000 https://www.kitguru.net/?p=648246 It's a new laptop from Gigabyte, packing an i9-14900HX and RTX 4070 for £1900

The post Gigabyte Aorus 16X (2024) Review w/ 14900HX & RTX 4070 first appeared on KitGuru.]]>
Announced at CES 2024, today we are taking a look at the Gigabyte Aorus 16X. This laptop is hitting the market at £1899.99 here in the UK, and for the money you get a 16in QHD+ display, i9-14900HX CPU, RTX 4070 Laptop GPU, 32 gigs of DDR5 memory and 2TB of NVMe storage. On paper it certainly sounds attractive, and Gigabyte also makes a feature of this machine's AI smarts, so let's see what it can do…

Specification:

  • CPU: Intel® Core™ i9-14900HX Processor (36M Cache, up to 5.8 GHz, 24 cores : 8 P-core and 16 E-core)
  • Video Graphics: NVIDIA® GeForce RTX™ 4070 Laptop GPU 8GB GDDR6, Boost Clock 2175MHz / Maximum Graphics Power 140 W
  • Display: 16.0“ 16:10 WQXGA (2560×1600) 165Hz Display (100% sRGB, Pantone® Validated, TÜV Rheinland-certified, Dolby Vision®, NVIDIA® Advanced Optimus, G-SYNC)
  • System Memory: 2x DDR5 Slots (DDR5-5600MHz, Up to 64GB)
  • Storage: 2x M.2 SSD slots (Supports 2x PCIe® Gen4x4 NVMe™ M.2 SSD, Up to 4TB)
  • Keyboard Type: 3-zone RGB Backlit Keyboard, Up to 1.7mm Key-travel (Support N-Key)
  • Left Side I/O:
    • 1 x DC in
    • 1 x RJ-45
    • 1 x HDMI 2.1
    • 1 x Type-A support USB3.2 Gen2
    • 1 x Type-C with Thunderbolt™4 (support USB4, DisplayPort™ 1.4 and Power Delivery 3.0)
  • Right Side I/O:
    • 1 x Type-A support USB3.2 Gen2
    • 1 x Type-C support USB3.2 Gen2, DisplayPort™ 1.4
    • 1 x MicroSD (UHS-II)
    • 1 x Audio Jack support mic / headphone combo
  • Audio: 2x 2W Speaker
  • Communications:
  • Wi-Fi: Intel® Wi-Fi 7 Wireless (802.11be 2×2)
  • LAN: 1G
  • Bluetooth: Bluetooth® V5.4
  • Webcam: FHD (1080p) IR Webcam
  • Battery: Li Polymer 99Wh
  • Adapter: 240W AC Adapter, 100W PD
  • Dimensions: 35.6(W) x 25.4(D) x 2.0~2.7(H) cm
  • Weight: ~2.3 kg / ~5.07 lb

Kicking things off with a look at the design of the Aorus 16X, Gigabyte has kept things pretty understated here. The lid is left almost completely bare save for the Aorus logo and some branding in the upper corner, while you may note there is a very subtle blue-ish hint which I think is a lovely touch. Once turned on there is some RGB lighting on the rear of the machine, but otherwise this is a fairly laid-back design. It's also relatively slender for a gaming machine, coming in at 27mm thick and weighing 2.3 KG.

The lid is made of metal and feels solid, with only a small amount of flex in the screen if you put pressure on both corners (though we obviously don't recommend that!) The inside deck and underside are made from plastic, but it still feels very solid with very little flex in the main body of the machine. Sure, it would have been nice to have an all-aluminium chassis like the MacBook or Razer Blade units, but for the price we can't really complain.

Opening the lid give us a closer look at the keyboard. While the unit I have is a US layout with half-height enter key, Gigabyte assures me UK buyers will get a more familiar ISO layout, but that's the only other difference between my sample and final retail models. The keyboard itself is fine, it's fairly standard laptop scissor-switch fare, while the RGB lighting is customisable in Gigabyte's Control Center software.

The trackpad is even better to use, being nice and large but very smooth with satisfying buttons. I wouldn't game with it, but for browsing the web or any general usage tasks, it is more than good enough. A 1080p webcam also comes built into the top bezel, which isn't the best quality but is acceptable for any video meetings you may have to sit through.

All display tests conducted utilising Portrait Displays' Calman Ultimate software. All results shown relative to the sRGB colour space and D65 target colour balance.

Below that we find the 16in 2560×1600 display, a 16:10 aspect ratio which means there's a bit of extra vertical estate compared to a more typical 16:9 screen. Gigabyte doesn't specify what panel type is used, but it appears to be an IPS-type manufactured by BOE. Gigabyte only claims up to 400 nits but I saw over 550 in my testing at 100% brightness, with a contrast ratio of 1321:1 which is typical of modern IPS displays. Gamut came in a bit below the claimed 100% sRGB coverage however, as I saw 95% coverage in my tests.

Greyscale performance is good though, with an average deltaE of 2.81, though the colour balance is slightly warm, averaging 6116K. Gamma is also a touch high across the board, averaging 2.3, and while I couldn't find any option to tweak this, I did ask Gigabyte if this might be possible. Colour accuracy is another strong point of the display as we saw an average dE of 2.71 and a maximum of 4.84, indicating decent factory calibration. For gaming too, the 165Hz refresh rate delivers a fluid experience with decent response times on offer.

As for the I/O, all the ports are split between the left and right sides. The left side is home to the power input, Ethernet, HDMI 2.1 video output, one USB 3.2 Gen2 Type-A, and one Type-C port that supports Thunderbolt 4, USB, DP 1.4 and PD 3.0. The right side features another two USB 3.2 Gen2 ports – one being Type-A and the other Type-C, along with a microSD slot and combo audio jack. I think this is a decent selection, two type-A ports on a modern laptop is acceptable I think, my only slight quibble is microSD instead of a full-sized version which is much more common for photo and video work, but it's good enough overall.

Internally we also have a few things to note. The first is the large 99.2WHr battery, and then we get two M.2 SSDs. These are labelled ‘AG450E', which indicates they are Aorus Gen4 5000E drives, and there's a pair of 1TB units in the 16X. We can also see the two 16GB DDR5 SO-DIMM modules from Samsung, rated at 5600MHz, alongside an Intel BE200 WiFi 7 M.2 card. I have no real issues with the internal layout, other than the fact that both M.2 and memory slots are already occupied, meaning users will have to swap out the existing hardware to make any upgrades to the storage or memory. It's not the end of the world, just something to be aware of.

Lastly, just confirming the core spec of the machine with CPU-Z and GPU-Z, the processor is Intel's Raptor Lake Refresh i9-14900HX, offering eight P-cores and sixteen E-cores, with a supposed 55W power budget but we'll talk about that on the next page! 32GB of Samsung DDR5 is supplied, rated at 5600MHz, with 46-45-45-89 timings. Graphics horsepower is provided by the RTX4070 Laptop chip, configured with a 95-140W power budget.

Be sure to check out our sponsors store EKWB here

The post Gigabyte Aorus 16X (2024) Review w/ 14900HX & RTX 4070 first appeared on KitGuru.]]>
https://www.kitguru.net/lifestyle/mobile/laptops/dominic-moass/gigabyte-aorus-16x-2024-review-w-14900hx-rtx-4070/feed/ 0
Elgato Facecam Pro Review (vs a £650 Sony camera!) https://www.kitguru.net/peripherals/mat-mynett/elgato-facecam-pro-review-vs-a-650-sony-camera/ https://www.kitguru.net/peripherals/mat-mynett/elgato-facecam-pro-review-vs-a-650-sony-camera/#respond Wed, 14 Feb 2024 12:00:15 +0000 https://www.kitguru.net/?p=646439 The Elgato Facecam Pro is one of a handful of webcams to support 4k 60fps video capture

The post Elgato Facecam Pro Review (vs a £650 Sony camera!) first appeared on KitGuru.]]>
Elgato is a name synonymous with streaming and content creation. The company has released some unique products that have gone on to dominate the streaming world, and their latest webcam, the Facecam Pro, was the first in the world to support 4K 60fps capture. Coming with a hefty £300 price tag, can this premium webcam rival the performance of a fully fledged camera like the Sony ZV1?

Timestamps:

00:00 intro
00:43 First look at the webcam
01:54 Specs and pricing
04:03 Camera design
05:06 Elgato software
07:55 Camera comparisons – meet the contenders
09:59 Big camera comparison test!
16:08 Mat’s closing thoughts

Specifications:

  • SUPPORTED RESOLUTIONS – 2160p60, 2160p30, 1080p60, 1080p30, 720p60, 720p30
  • OPTICS – Elgato Premium Autofocus Lens
  • FOCUS RANGE – 10 cm / 4 in – ∞
  • APERTURE – f/2.0
  • FOCAL LENGTH – 21 mm (*full-frame equivalent)
  • FIELD OF VIEW – 90°
  • SENSOR – SONY® STARVIS™ CMOS
  • CONNECTION – USB Type C
  • USB VIDEO CLASS – (UVC) compatible
  • DIMENSIONS – W 116 x H 38 x D 79 mm | 4.6 x 1.5 x 3.1 in (without mount)
  • WEIGHT – 240 g | 0.53 lb (without mount)

You can buy the the Elgato Facecam Pro directly from Elgato for £299.99 HERE.

Discuss on our Facebook page HERE.

Pros:

  • True 4K 60fps video capture.
  • Auto and manual focus.
  • Great software and expansive controls.

Cons:

  • Expensive.
  • Arguably overkill for most webcam users.

KitGuru says: The Elgato Facecam Pro is, without a doubt, the best performing webcam we've ever tested. The amount of adjustability and almost ‘DSLR-like' settings help with dialling in great looking video. For the target customer, streamers and content creators, there is not much out there, aside from a ‘proper' camera that will match the Facecam Pro. However, for most people, this level of webcam will be overkill.

Be sure to check out our sponsors store EKWB here

The post Elgato Facecam Pro Review (vs a £650 Sony camera!) first appeared on KitGuru.]]>
https://www.kitguru.net/peripherals/mat-mynett/elgato-facecam-pro-review-vs-a-650-sony-camera/feed/ 0
Kioxia Exceria Plus G3 2TB SSD Review https://www.kitguru.net/components/ssd-drives/simon-crisp/kioxia-exceria-plus-g3-2tb-ssd-review/ https://www.kitguru.net/components/ssd-drives/simon-crisp/kioxia-exceria-plus-g3-2tb-ssd-review/#respond Mon, 12 Feb 2024 13:00:27 +0000 https://www.kitguru.net/?p=645873 It's a 2TB Gen4 SSD that's barely £100, but is it worth picking up?

The post Kioxia Exceria Plus G3 2TB SSD Review first appeared on KitGuru.]]>
Kioxia's latest addition to their Exceria lineup of PCIe Gen4 SSDs is the Exceria Plus G3, a drive aimed at the mainstream market using a combination of a Phison controller and BiCS NAND. With the 2TB model retailing for barely £100, let's find out if this drive is worth buying.

At launch just two capacities; 1TB and 2TB, make up the Exceria Plus G3 product line. At the heart of the Plus G3 is a Phison PS5021-E21 4-channel DRAM-less controller which is used in combination with Kioxia BiCS TLC NAND although at the time of writing, Kioxia hasn't disclosed which version of BiCS it is using in the drive.

Kioxia rates both drives' Sequential performance as up to 5,000MB/s for reads and up to 3,900MB/s for writes. As for 4K random performance, both drives have the same up to 950,000 IOPS rating for writes while the 2TB drive is rated as up to 680,000 IOPS for reads the 1TB drive is faster at up to 770,000 IOPs.

The TBW endurance for the Exceria Plus G3 drives is quoted as up to 600TB for the 1TB drive and 1.200TB for the flagship 2TB drive and Kioxia backs the range with a 5-year warranty.

Physical Specifications:

  • Usable Capacities: 2TB.
  • NAND Components: Kioxia BiCS TLC NAND.
  • NAND Controller: Phison PS5021-E21.
  • Cache: None.
  • Interface: PCIe Gen 4 x4, NVMe 1.4.
  • Form Factor: M.2 2280.
  • Dimensions: 22.15 x 80.15 x 2.63mm.
  • Drive Weight: 7.4g.

Firmware Version: ELFA01.2

Be sure to check out our sponsors store EKWB here

The post Kioxia Exceria Plus G3 2TB SSD Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/ssd-drives/simon-crisp/kioxia-exceria-plus-g3-2tb-ssd-review/feed/ 0
Cooler Master NCORE 100 Max ITX Case Review https://www.kitguru.net/components/cases/james-dawson/cooler-master-ncore-100-max-itx-case-review/ https://www.kitguru.net/components/cases/james-dawson/cooler-master-ncore-100-max-itx-case-review/#respond Fri, 09 Feb 2024 12:00:43 +0000 https://www.kitguru.net/?p=646888 Has Cooler Master gone early and launched the best ITX case of 2024 already?

The post Cooler Master NCORE 100 Max ITX Case Review first appeared on KitGuru.]]>
It's been a while since I last looked at a mini-ITX case but Cooler Master reached out to us recently and asked if we fancy taking a look at a new addition to their Max mini-ITX lineup. The NCORE 100 Max is equipped with an 850W ATX 3.0 power supply, PCIe 4 riser kit and a custom 120mm AIO that Cooler Master says is capable of cooling a 13900K CPU. It has some other smart features that could make the NCORE 100 Max the most interesting ITX case we see this year. So let's dive in and see just how good this case is.

Timestamps:

00:00 Start
00:56 Pricing
01:32 Overview
02:26 A close look
06:37 Default mode GPU support
07:17 switching to extended mode
09:59 Features – I/O – more details
12:08 Supported hardware / accessories
13:13 Hardware for the build
14:14 Timelapse build
16:39 James' thoughts on the build process
17:24 Thermal and Noise testing
19:29 Closing Thoughts

Cooler Master NCORE 100 Max Features:

  • Cooler Master says the NCORE 100 Max is the easiest compact case on the market to build in, Just pop in your motherboard and GPU through the open frame design and connect the pre-routed cables.
  • The NCORE 100 Max features a minimalist industrial design that would look right at home or in a design studio.
  • The layout has been designed to ensure maximum thermal efficiency using a combination of negative air pressure with top and rear installed fans.
  • NCORE 100 Max boasts the smallest footprint in the small form factor market, the same size as a piece of A5 paper.
  • The case comes equipped with a pre-installed custom AIO cooler and a high-efficiency V series 850W SFX ATX 3.0 Power supply.
  • The default case volume of 15.8L can be extended to 17.54L to support even the largest RTX 4090 graphics cards.

Specifications:

  • Case Type: Small Form Factor
  • Dimensions: 155 x 212 x 481mm (Normal Mode) 172 x 212 x 481mm (Extended Mode)
  • Material: Steel, Plastic, Aluminium
  • Motherboard Support: ITX
  • Expansion Slots: 3 PCIe Slot mounting
  • Storage Bays: 1 (2.5-inc)
  • Max GPU Size: 337 x 62 x 180mm (Normal Mode) 357 x 79 x 180mm (Extended Mode)
  • Max CPU Cooler Height: 48mm
  • Max PSU Size: 100mm
  • Fan Support: 120mm (Top Radiator) 120mm (Rear)
  • Pre-installed fans: 120mm (rear) 120mm (Top Radiator)
  • Radiator Support: 120mm (Top, Included)
  • Dust Filters: Left/Right side panels
  • Font I/O: 2 x USB 3.2 Gen2 Type-A, 1 x USB 3.2 Gen2x2 Type-C, Combined 3.5mm Audio Jack
  • LCD Screen: N/A
  • Included PSU: Cooler Master V SFX Gold 850W ATX 3.0
  • Included AIO: 120mm Radiator with 38mm thickness, custom PWM Fan

Thermal Performance Testing

To simulate thermal demand we run the Cinebench R23 multi-thread benchmark and 3DMark Speed Way stress test simultaneously in a loop for 30 minutes to fully load the system. This gives the CPU and GPU enough time to reach constant steady-state temperature. With this data, we can compare how the system handles the thermal demand and measure peak noise levels.

Thermal performance is measured with the case in various configurations, such as the default, with the tempered glass left-hand side panel removed and with the front panel removed to see how these configurations affect the CPU and GPU temperature. During testing, only stock case fans are used unless otherwise specified. All water pumps are set to maximum RPM and fans are set to a custom RPM curve by the Motherboard software/BIOS.

All temperature measurements are presented as Deltas – meaning the ambient temperature has been deducted from the CPU temperature giving us a Delta. Data shown in the charts represent the average component temperature over the length of the test as measured by HWiNFO and then the last 15 minutes of the data are calculated to get the average. The ambient temperature during thermal tests is between 20-22⁰C.

Test System Specification:

Thermal Performance Overview

We ran most of the thermal tests using the AMD Ryzen 9 7900X CPU. However, we noticed significant downclocking of the CPU frequency due to temperature so we ran an additional test using the Ryzen 5 7600X also.

In any configuration, CPU temperatures are within a couple of degrees of each other. This is normal for AMD Ryzen 7000 processors as they are designed to run up to 95°C while automatically adjusting clock frequency to not exceed this temperature, so the important metric to look at is CPU frequency.

In the default case configuration CPU temperature averaged 76°C delta. The average CPU clock frequency in this configuration was just under 4.8GHz which is substantially lower than what we would expect with the 7900X in a mid-tower chassis with good airflow and cooling. Removing the dust filters had only a minor impact on CPU temperature and clock frequency so the dust filters must not be restrictive.

Removing the top mesh panel had a more positive effect on the average CPU frequency raising it to over 4.8GHz, but the biggest increase in clock frequency was with both side panels completely removed, effectively turning the case into an open frame which saw average CPU clocks of over 4.9GHz which is closer to what would be expected of the 7900X in a chassis with good airflow, but the limitation here is the 120mm AIO cooler.

GPU core temperature in either configuration was great at between 49 – 51°C average delta. Changing case configuration had no significant effect on the GPU.

Noise Output

Changing the case configuration didn't affect the noise output much at all. However, the noise output dropped slighting under load with the case side panels removed since the lower GPU temperature meant that the GPU fans didn't automatically ramp up the RPM as much in this configuration.

Closing Thoughts

Taken as a whole the Cooler Master NCORE 100 Max is a very good ITX case. The included and pre-installed power supply, custom 120mm AIO cooler and PCIE 4 riser kit certainly speed up installation time. Even while filming the build time lapse and moving cameras around, I was able to complete the build in approximately 20-25 minutes. It’s a very simple build experience, which is something you can't always say with ITX  builds. So as long as you are happy with the included hardware you will like this case.

One thing that pre-installed hardware does is it takes away the experience of researching and selecting your own choice of hardware for the build, which is what some users will enjoy as much as building and using the system. Nevertheless, the pre-installed Cooler Master PSU is capable of running most RTX 4090 graphics cards, overclocked SKUs might be an issue since the 12VHPWR cable is only rated at 450W but still, it means that most 4090s are supported which is great for such a compact chassis.

The build quality of the NCORE 100 Max is very good, there is some minor flex in the chassis but this is to be expected due to the open frame design when side panels are removed. The metallic paint finish on the aluminium sides give the case a premium look and feel. Thermal performance is good, GPU Core temperature during our thermal tests was what we would expect from a high airflow ATX case.

A problem some users will run into when using high-power CPUs is the limitation of the 120mm AIO. The 38mm thick radiator means it's not completely overwhelmed by heat produced by high-power CPUs but in our thermal tests, we noticed significant downclocking of the CPU frequency due to the 120mm AIO struggling to keep the AMD Ryzen 9 7900X CPU below 95°C. If you want this system for gaming, however, something like a Ryzen 7 7800X3D should be ok.

Other niggles we had with the case include the noise from the power supply, even with the system idle and no load on the system, the power supply fan is spinning and the noise coming from it is distracting. There's also no scope for adding extra fans to improve airflow and system cooling. Connecting display cables in extended mode will require some low-profile 90-degree adaptors as a standard HDMI or DisplayPort cable can't be bent around enough to clear the surface that the case stands on. It would be better if Cooler Master supplied some low-profile angled HDMI and DP adaptors with the case.

But other than those minor issues we like the Cooler Master NCORE 100 Max a lot. The small footprint means it can fit in almost any desk space, system installation is very quick and simple and the build quality is high. It provides good thermal performance, most notably the GPU temperature and it’s a solid premium-looking product.

The Cooler Master NCORE 100 Max is expected to be available from Scan.co.uk from 19th February at an early bird two-week special price of £339.99 then increasing to £359.99 thereafter.

Discuss on our Facebook page HERE.

Pros:

  • Pre-installed PSU and AIO save time on system installation.
  • Build quality is great.
  • The metallic finish looks premium.
  • ATX 3.0 PSU has a 12VHPWR connection.
  • Excellent GPU compatibility.
  • Great GPU thermals.

Cons:

  • The Custom 120mm AIO will struggle to cool higher-power CPUs.
  • No scope for installing additional fans.
  • Display output cables will not fit in extended mode.
  • The PSU Fan is loud even when the system is idle.

KitGuru says: If you are in the market for a premium ITX case and want a speedy installation then the Cooler Master NCORE 100 Max could be the perfect case for you, just as long as your CPU isn't too hot for the included 120mm AIO.

Be sure to check out our sponsors store EKWB here

The post Cooler Master NCORE 100 Max ITX Case Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/cases/james-dawson/cooler-master-ncore-100-max-itx-case-review/feed/ 0
Palit RTX 4070 Ti Super GamingPro White OC Review https://www.kitguru.net/components/graphic-cards/dominic-moass/palit-rtx-4070-ti-super-gamingpro-white-oc-review/ https://www.kitguru.net/components/graphic-cards/dominic-moass/palit-rtx-4070-ti-super-gamingpro-white-oc-review/#respond Thu, 08 Feb 2024 13:31:29 +0000 https://www.kitguru.net/?p=647053 It's an all-white 4070 Ti Super from Palit - but how does it perform?

The post Palit RTX 4070 Ti Super GamingPro White OC Review first appeared on KitGuru.]]>
Today we are taking another look at the RTX 4070 Ti Super, as we have Palit's GamingPro White OC model in for review. Sporting a fresh white colour scheme that is complimented by RGB lighting, Palit says this card 'embodies refined purity and powerful aesthetics' while it also ‘exudes grace'. Those are some big claims, so let's put this card through its paces and see how it stacks up to the competition…

There's no denying that white PC components have seen a surge in popularity over the last two years, and most manufacturers have started producing multiple colour options for each new product hitting the market. The same applies for the Palit RTX 4070 Ti Super GamingPro White OC, as it is effectively just a white version of the regular GamingPro card.

That means it still sports a thick triple-fan cooler, factory overclocked core as well as an on-board ARGB header so you can control the lighting via your motherboard. Without further ado, it's time to see what this card can bring to the table…

RTX 4090 RTX 4080 Super RTX 4080 RTX 4070 Ti Super RTX 4070 Ti
Process TSMC N4 TSMC N4 TSMC N4 TSMC N4 TSMC N4
SMs 128 80 76 66 60
CUDA Cores 16384 10240 9728 8448 7680
Tensor Cores 512 320 304 264 240
RT Cores 128 80 76 66 60
Texture Units 512 320 304 264 240
ROPs 176 112 112 96 80
GPU Boost Clock 2520 MHz 2550 MHz 2505 MHz 2610 MHz 2610 MHz
Memory Data Rate 21 Gbps 23 Gbps 22.4 Gbps 21 Gbps 21 Gbps
L2 Cache 73729 KB 65536 KB 65536 KB 49152 KB 49152 KB
Total Video Memory 24GB GDDR6X 16GB GDDR6X 16GB GDDR6X 16GB GDDR6X 12GB GDDR6X
Memory Interface 384-bit 256-bit 256-bit 256-bit 192-bit
Memory Bandwidth 1008 GB/Sec 736 GB/Sec 716.8 GB/Sec 672 GB/Sec 504 GB/Sec
TGP 450W 320W 320W 285W 285W

First, a quick spec recap. Unlike the RTX 4070 Ti and RTX 4070 Super which are based on AD104 silicon, the new 4070 Ti Super uses a cut-down AD103 die, measuring 379mm2. The fundamental building blocks are still the same of course, with the RTX 4070 Ti Super offering a total of 66 Streaming Multiprocessors (SMs), each housing 256 CUDA Cores, for a total of 8448. We also find 66 RT cores, 264 Tensor cores, 264 Texture Units, and 96 ROPs.

TSMC's N4 node has Nvidia cranking up the clock speed significantly this generation, with the RTX 4070 Ti Super sporting the same 2610MHz rated boost clock as the 4070 Ti. Palit has increased this to 2655MHz with the GamingPro OC, but we would expect GPU Boost to push things further still.

The memory configuration is arguably the biggest upgrade over the other xx70 series SKUs. Moving to AD103 means the 4070 Ti Super comes equipped with a 256-bit memory interface, paired with 16GB GDDR6X running at 21Gbps, putting total memory bandwidth at 672 GB/s. L2 cache remains the same as the RTX 4070 Ti, with 49152KB.

Considering the increased core-count, it's interesting that power draw remains the same as the RTX 4070 Ti, with the new Super model still boasting a 285W TGP, and Palit has not increased this out of the box.

Be sure to check out our sponsors store EKWB here

The post Palit RTX 4070 Ti Super GamingPro White OC Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/graphic-cards/dominic-moass/palit-rtx-4070-ti-super-gamingpro-white-oc-review/feed/ 0
Asus Zenbook 14 OLED UX3405M w/ Intel Core Ultra 7 155H https://www.kitguru.net/lifestyle/mobile/notebook/leo-waldock/asus-zenbook-14-oled-ux3405m-intel-core-ultra-7-155h-in-action/ https://www.kitguru.net/lifestyle/mobile/notebook/leo-waldock/asus-zenbook-14-oled-ux3405m-intel-core-ultra-7-155h-in-action/#respond Wed, 07 Feb 2024 13:03:11 +0000 https://www.kitguru.net/?p=647172 Leo goes hands-on with the new Meteor Lake Core Ultra 7 155H

The post Asus Zenbook 14 OLED UX3405M w/ Intel Core Ultra 7 155H first appeared on KitGuru.]]>
KitGuru has been waiting patiently to get hands-on with Intel's Meteor Lake laptop CPU and the time has now arrived as we take a close look at the Asus Zenbook 14 OLED UX3405M. This thin and light EVO laptop sports an Intel Core Ultra 7 155H CPU, a 3K OLED touchscreen, some incredibly fast LPDDR5x-8533 memory and is housed in a skinny chassis that weighs less than 1.3kg.

Time stamps:
00:00 Start
01:08 Details
03:30 Ports and Connectors
04:27 Hardware specification
06:11 Intel Core Ultra 7 155H
09:27 Cinebench
09:53 Power Consumption
10:06 Performance results
11:21 Battery Test
11:40 Testing AI
15:47 Leo’s Closing Thoughts

Before we take a look at the Asus Zenbook 14 OLED UX3405M, we need to talk about the Intel Core Ultra CPU. KitGuru has covered the development of Intel Meteor Lake a number of times and it would make very little sense to repeat that coverage in this review. If you are not already up to speed we suggest you do some research HERE.

Features

  • Mobility
    Enjoy uncompromising mobility with the sleek, lightweight, and sturdy all-metal design. The specially crafted seamless finish on the sides offers a smoother touch experience. Zenbook 14 OLED is always ready for any challenge, anywhere!
  • Battery
    Untether yourself from the mains and be productive everywhere. Zenbook 14 OLED has the day-long stamina you need, and more. And when it’s time for a top-up, USB-C Easy Charge makes it ultra-quick and ultra-convenient!
  • Performance
    Effortlessly tackle tasks with the AI-enhanced multitasking prowess of Zenbook 14 OLED. With the integrated NPU AI engine in the Intel Core Ultra processor, AI-based apps will fly, and its ultrafast up to 1 TB SSD storage, 32 GB RAM and WiFi 6E6 mean you’ll wait less and be able work faster, wherever you are.

Specification

  • CPU: Intel Core Ultra 7 155H (6P + 8E + 2LP cores/22 Threads) 35W TDP
  • Screen: 14.0-inch 3K Touchscreen (2,880 x 1,800) 120Hz OLED, 400 nits
  • Graphics: Intel Arc Graphics
  • Memory: 32GB LPDDR5x-8533 dual channel
  • Storage: 1TB SanDisk SN560 Gen 4.0
  • Audio: Realtek HD Audio
  • Networking: Intel Wi-Fi 6E AX211, BT 5.3, Ethernet dongle included.
  • I/O ports:
    • 2x Thunderbolt 4 Type-C
    • 1x USB 3.2 Gen 1 Type-A 5Gbps
    • HDMI 2.1
  • Battery: 9702mAh, 75Wh Li-Ion
  • Dimensions: 312mm x 220mm x 14.9mm
  • Weight: 1.28kg plus 240g for 65W USB-C power supply
  • Windows: 11 Home

Be sure to check out our sponsors store EKWB here

The post Asus Zenbook 14 OLED UX3405M w/ Intel Core Ultra 7 155H first appeared on KitGuru.]]>
https://www.kitguru.net/lifestyle/mobile/notebook/leo-waldock/asus-zenbook-14-oled-ux3405m-intel-core-ultra-7-155h-in-action/feed/ 0
Gigabyte RTX 4070 Ti Super Aero OC Review https://www.kitguru.net/components/graphic-cards/dominic-moass/gigabyte-rtx-4070-ti-super-aero-oc-review/ https://www.kitguru.net/components/graphic-cards/dominic-moass/gigabyte-rtx-4070-ti-super-aero-oc-review/#respond Tue, 06 Feb 2024 13:43:16 +0000 https://www.kitguru.net/?p=647056 It's another 4070 Ti Super with a beautiful white aesthetic - but how good is the cooler?

The post Gigabyte RTX 4070 Ti Super Aero OC Review first appeared on KitGuru.]]>
It's only been three weeks since we checked out Gigabyte's RTX 4070 Super Aero OC, but today we have the RTX 4070 Ti Super model in for review. Featuring an eye-catching white and silver design, this card also sports a dual-BIOS switch, alongside a factory overclocked core and some subtle RGB lighting. We put it through its paces and find out if it's worth buying.

If you're in the market for a new white graphics card, you likely have your eye on a number of Gigabyte's Aero models, and the RTX 4070 Ti Super Aero OC in for review today is certainly a looker. You do pay for the privilege, as we've seen it online anywhere from £850 to £920, but it offers a number of attractive features on top of its gaming performance. We test thermals, acoustics, overclocking and more to find out just how good this card is…

RTX 4090 RTX 4080 Super RTX 4080 RTX 4070 Ti Super RTX 4070 Ti
Process TSMC N4 TSMC N4 TSMC N4 TSMC N4 TSMC N4
SMs 128 80 76 66 60
CUDA Cores 16384 10240 9728 8448 7680
Tensor Cores 512 320 304 264 240
RT Cores 128 80 76 66 60
Texture Units 512 320 304 264 240
ROPs 176 112 112 96 80
GPU Boost Clock 2520 MHz 2550 MHz 2505 MHz 2610 MHz 2610 MHz
Memory Data Rate 21 Gbps 23 Gbps 22.4 Gbps 21 Gbps 21 Gbps
L2 Cache 73729 KB 65536 KB 65536 KB 49152 KB 49152 KB
Total Video Memory 24GB GDDR6X 16GB GDDR6X 16GB GDDR6X 16GB GDDR6X 12GB GDDR6X
Memory Interface 384-bit 256-bit 256-bit 256-bit 192-bit
Memory Bandwidth 1008 GB/Sec 736 GB/Sec 716.8 GB/Sec 672 GB/Sec 504 GB/Sec
TGP 450W 320W 320W 285W 285W

First, a quick spec recap. Unlike the RTX 4070 Ti and RTX 4070 Super which are based on AD104 silicon, the new 4070 Ti Super uses a cut-down AD103 die, measuring 379mm2. The fundamental building blocks are still the same of course, with the RTX 4070 Ti Super offering a total of 66 Streaming Multiprocessors (SMs), each housing 256 CUDA Cores, for a total of 8448. We also find 66 RT cores, 264 Tensor cores, 264 Texture Units, and 96 ROPs.

TSMC's N4 node has Nvidia cranking up the clock speed significantly this generation, with the RTX 4070 Ti Super sporting the same 2610MHz rated boost clock as the 4070 Ti. Gigabyte has increased this to 2655MHz with the Aero OC, but we would expect GPU Boost to push things further still.

The memory configuration is arguably the biggest upgrade over the other xx70 series SKUs. Moving to AD103 means the 4070 Ti Super comes equipped with a 256-bit memory interface, paired with 16GB GDDR6X running at 21Gbps, putting total memory bandwidth at 672 GB/s. L2 cache remains the same as the RTX 4070 Ti, with 49152KB.

Considering the increased core-count, it's interesting that power draw remains the same as the RTX 4070 Ti, with the new Super model still boasting a 285W TGP, and Gigabyte has not increased this out of the box.

Be sure to check out our sponsors store EKWB here

The post Gigabyte RTX 4070 Ti Super Aero OC Review first appeared on KitGuru.]]>
https://www.kitguru.net/components/graphic-cards/dominic-moass/gigabyte-rtx-4070-ti-super-aero-oc-review/feed/ 0