Home / Component / Power Supplies / Thermaltake launches Toughpower TF3 1550W with Titanium efficiency for high-power builds

Thermaltake launches Toughpower TF3 1550W with Titanium efficiency for high-power builds

Today, ThermalTake is launching what should be its best power supply yet. The new Toughpower TF3 offers 1550W of capacity, supporting the highest-end ATX 3.0 graphics cards, with two native 12V2X6 modular cables and 80Plus Titanium efficiency.

The TF3 1550W meets Intel ATX 3.0 standards, supporting up to 200% total power excursion, 300% GPU power excursion, and 70% low load efficiency. Additionally, the TF3 1550W has great GPU compatibility, it includes two native PCIe 12V2X6 connectors that can connect to the latest RTX 40 series graphics cards, but you also get 8-pin PCIe cables too if your GPU has the older standard connectors.

With 80Plus Titanium efficiency, this power supply has high efficiency up to 94 percent, resulting in lower power loss and heat build-up. The PSU also relies on Japanese capacitors, a stamp of quality for many power supplies due to their reliability.

Other features of the TF3 1550W include a Turbo Fan button, allowing you to increase the PSU fan speed under high loads, as well as low ripple noise below 30mV, strict voltage regulation, power interruption protections, low transient response, as well as OCP (Over Current Protection), OVP (Over Voltage Protection), UVP (Under Voltage Protection), OPP (Over Power Protection), SCP (Short Circuit Protection) and OTP (Over Temperature Protection).

The Thermaltake Toughpower TF3 1550W will be available starting this month, priced at €399.90.

Discuss on our Facebook page, HERE.

KitGuru Says: Are you in the market for a high-end power supply for a dream build?

Become a Patron!

Check Also

Cooler Master V Platinum V2 1600 PSU Review

We check out a 1600W unit from Cooler Master with 80 Plus Platinum efficiency