Home / Component / Cooling / Cooler Master MasterAir Pro 3 and MasterAir Pro 4 Review

Cooler Master MasterAir Pro 3 and MasterAir Pro 4 Review

Rating: 7.0.

Ever since the release of the legendary Hyper 212 EVO, Cooler Master has been trying to build on its success. Today we can see how far they've come by looking at two new air coolers in the MasterAir family – the MasterAir Pro 3 and the MasterAir Pro 4. Given the former costs £33.95 while the latter is £41.99, both these coolers are up against some serious competition.

The £30-£40 air cooling market is ferociously competitive, so it will be very interesting to see how the Cooler Master MasterAir Pro 3 and MasterAir Pro 4 fare against competing coolers. Read on for our full review, including a look at the coolers' features, installation process and performance.

MasterAir Pro 3 Specification

  • Dimensions (LxWxH): 78x117x140mm
  • Heat Sink Dimensions (LxWxH): 61.5x108x140mm
  • Heat Sink Material: 3 Heat Pipes / CDC 2.0 / Aluminum Fins
  • Heat Sink Weight: 390g
  • Heat Pipe Dimensions: Ø6 mm
  • Fan Dimensions: 92 x 92 x 25 mm
  • Fan Speed: 650 – 3,000 RPM (PWM) ± 10%
  • Fan Air Flow: 28 CFM (Max) ± 10%
  • Fan Air Pressure: 2.5 mmH2O (Max)
  • Fan Life Expectancy: 350,000 hours
  • Noise Level: 6~30 dBA (Max)
  • Bearing Type: POM Bearing-CM 4th Gen. Bearing
  • Connector: 4-pin PWM
  • Rated Voltage: 12 VDC
  • Rated Current: 0.1 A
  • Power Consumption: 1.2 W
  • Warranty: 5 years

MasterAir Pro 4 Specification

  • Dimensions (LxWxH): 84x129x158mm
  • Heat Sink Dimensions (LxWxH): 60x116x158mm
  • Heat Sink Material: 4 Heat Pipes / CDC 2.0 / Aluminum Fins
  • Heat Sink Weight: 472g
  • Heat Pipe Dimensions: Ø6 mm
  • Fan Dimensions: 120 x 120 x 25 mm
  • Fan Speed: 650 – 2,000 RPM (PWM) ± 10%
  • Fan Air Flow: 66.7 CFM (Max) ± 10%
  • Fan Air Pressure: 2.34 mmH2O (Max)
  • Fan Life Expectancy: 490,000 hours
  • Noise Level: 6~30 dBA (Max)
  • Bearing Type: POM Bearing-CM 4th Gen. Bearing
  • Connector: 4-pin PWM
  • Rated Voltage: 12 VDC
  • Rated Current: 0.15 A
  • Power Consumption: 1.8 W
  • Warranty: 5 years

    Become a Patron!

Check Also

NZXT H7 Flow (2024) Case Review

Don't be fooled, it's not the same case that came out in 2022 - but what's changed?

6 comments

  1. Making money online through the internet is as super easy (or as stressful) quite as earning money off-line. However a wide range of Making money over the internet leaders promise to have a secret system to generate immediate dollars, the the reality is, it does not use any approach you may become wealthy person next day by just clicking a key or even acquiring some course. Earning profits via the internet takes hard work and regularity. If you happen to be ready to input enough time and strength in it, there are millions of ways to creating high money using the net.I am earning $10000 or just way more each and every month through this work.Here is the shortcut to generate money while the rest are longer term home money making ideas >>>>> DELICIOUSURL.COM//2s

  2. not at all impressed by anything cooler master has released under the “new” branding of Master/Maker branding as they are either all overpriced to vastly over priced for the product delivered or just essentially “rebranding” via a few subtle design changes from what they had released years prior so they can charge more for a “premium model” type thing, often with the “old” legacy products performing better being of higher quality etc with a lower price point.(have never been fond of the steel mesh face for their cases, it looks nice and all, but is a potato to keep looking good)

    The thermal paste/grease they have being MasterGel, MasterGel Pro, MasterGel Maker as well as ice fusion, Extreme Fusion X1, IC Essential E1/E2, Thermal Fusion 400 are all ok to very awesome performance for the price, wish thermal paste makers would have more included in each applicator 🙁

  3. Need a TX3/103 there for comparison.
    Much cheaper-been my go to for years………………..

  4. Google is paying 97$ per hour! Work for few hours and have longer with friends & family! !mj223d:
    On tuesday I got a great new Land Rover Range Rover from having earned $8752 this last four weeks.. Its the most-financialy rewarding I’ve had.. It sounds unbelievable but you wont forgive yourself if you don’t check it
    !mj223d:
    ➽➽
    ➽➽;➽➽ http://GoogleFinancialJobsCash223ShopPlusGetPay$97Hour ★★✫★★✫★★✫★★✫★★✫★★✫★★✫★★✫★★✫★★✫★★✫★★✫★★✫★★✫★★✫★★✫★★✫★★:::::!mj223d:….,……..

  5. Have you any time cashed in plenty of cash without reselling a thing as well as left out achieving any of the multilevel marketing kind of job and not have to invest anything at all. Allow me to tell you a job in which all of the resources is going to be alloted to you and also it truly is quite a simple in addition to easy work. No need to startup your personal domains and stuff like that., all is definitely delivered to you free. Folks definitely will visit the landing page therefore you are able to get paid for that. Its as easy as that. I am getting plenty of cash from a home office from this project really like $20000 each and every month and sometimes more if you too genuinely wish to make money like that so therefore follow all these not difficult directions by going to this page >>>>> GOCHIURL.COM/15d9f

  6. Federico Barutto

    Did you test them with the push-pin or with the backplate method? Because AFAIK the push pin method makes a worse contact because of the lower mounting force