KitGuru KitGuru.net – Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards
The Evil Black Edition features a lovely orange interior which you can see through the transparent window. There is also orange mesh on the side and front.
The window-side of the chassis can fit 4 x 120mm fans or even 4 x 140mm fans, which is rather impressive.
The front features 4 orange mesh strips with the remainder black. Aerocool's Performance Gaming System label features on the front.
The top of the Aerocool is certainly bold, and features a fan controller with two channels, 3 x USB 2.0, 1 x USB 3.0 and an eSATA port, as well as the usual headphone and microphone sockets. There is more orange styling this time featuring Aerocool's logo.
The back of the chassis features some stunning Orange PCI covers. These are made from mesh to aid with ventilation. A 120mm fan can also be fitted at the rear, with a full 4 watercooling holes, although one will be used for the USB 3.0 cable.
On top of the chassis is a little slider which raises the slits across the top, allowing for increased ventilation. The right side of the case features a plain panel.
The bottom features four large feet raising the case up nearly an inch. There is also a dust filter for the power supply which slides out towards the rear of the case. You can also see there is space for an additional 120mm fan at the bottom of the chassis.
I was about to say it looks v ery like my friends Venom Toxic! wow. I take it these are bought from the same chinese supplier? thats lame they can’t make their own cases.
I like the appearance. I guess if you budgeted another £20 you could replace the fans with good models from bequiet or similar.