Cases

DeepCool has introduced the CG590 Mesh 2F, a new mid-tower chassis featuring a mesh front panel, a dual-chamber interior, and two pre-installed 160mm ARGB intake fans. The case is scheduled to launch in Japan soon, but a wider global release is expected.  Designed for gaming and enthusiast systems, according to …

MSI has introduced the MPG Vixta 300R PZ and MPG Vixta 300R Airflow PZ, two new mid-tower cases featuring back-connect motherboard compatibility and a floating base design. MSI builds the MPG Vixta 300R PZ (via ITHome) with a seamless L-shaped, fully tempered glass panel. This chassis features a floating base …

Following on from reveals at Computex last month, Phanteks is now bringing its new high-end Enthoo Server cases to the market, including both the Enthoo Pro 2 Server V2 and the Enthoo Elite Server The Enthoo Pro 2 Server V2 features an all-metal exterior, but with lots of mesh for …

The new B4 mATX from Lian Li | Dan is here - but is it better than the previous A4?

Cooler Master has introduced the HAF II 500, a new high‑end airflow case built around oversized 220mm and 180mm fans to deliver stronger cooling performance at lower noise levels. Cooler Master says the HAF II 500 was engineered to move significantly more air without raising system noise. The case centres …

It's an incredible deal from Montech - the TG3 is just £50/$60

Leo helped NAME this case from Endorfy... but is it any good?

InWin has officially launched the Aeon, marking the company's 12th Signature Series chassis. First showcased at CES 2026, the premium full-tower enclosure features mirrored stainless steel, a seamless glass exterior, and an expandable frame design to accommodate high-end hardware. The Aeon uses mirrored stainless steel panels treated with an anti-fingerprint …

Cooler Master's Latest QUBE case is highly customisable but is it any good?

At Computex we were shown the Micro-ATX Corsair 2800X, however we were vague about the price and said ‘it will be priced towards the budget end of the scale'. The reason we were vague is that Corsair wasn't 100% sure they would be able to deliver the 2800X at the …

Lian Li has announced the B4-mATX, a 21.3-litre small form factor chassis co-developed with Dan Cases. Now available, the compact enclosure supports mATX motherboards and can be oriented either horizontally as a desktop unit or vertically as a space-saving tower. The B4 case rotates 90º into a vertical orientation, reducing …

Asus has introduced the Prime AP304 Series ATX cases, offering both standard and ARGB configurations. Interestingly, Asus has also implemented a new patented feature, a new slot vent design to isolate chambers for better airflow.  The new Asus Prime AP304 cases (via Vortez) feature a curved tempered-glass panel that extends …

Silverstone has finally launched the FLP03, a retro-inspired microATX chassis that pairs 1990s desktop aesthetics with modern hardware compatibility. Featuring a beige finish, the case has three 5.25″ expansion bays at the front and a functional Turbo button that triggers full-throttle cooling. The FLP03's interior layout accommodates microATX and Mini-ITX …

Montech has launched the TG3, a budget-friendly ATX fish-tank style case featuring a tiered bottom layout, back-connect motherboard support, and pre-installed unibody fans. This new TG3 case comes in black or white finishes and is tailored for performance systems with a minimalist exterior design. It includes a spacious interior that …

Cooler Master has announced the Q300L V3, the next generation of its compact microATX case, alongside a modular version called the Qube 340. The updated Q300L chassis supports Mini-ITX and mATX motherboards within a small desktop footprint. It has room for graphics cards up to 366mm long, CPU coolers up …

Known for its M Series SFF cases, Ncase has announced the P1, a 36-liter workstation chassis designed to house high-density AI hardware and multi-GPU setups. According to the manufacturer (via ITHome), the P1 is roughly 30% smaller than a typical mid-tower. Still, it handles the hardware density required for local …

In our latest Computex video, Leo checks in with be quiet!...

At Computex 2026, Arctic has revealed its upcoming hardware lineup, including the Freezer 61 CPU cooler series, a ten-channel fan controller, BioniX A-RGB fans, and the Xtender Mini PC case.

NZXT has announced the H6 series cases, featuring a dual-chamber design and support for back-connect motherboards. The new ATX chassis also features a one-piece curved tempered glass side panel for an unobstructed view of components. With a 55-litre internal volume, the chassis supports ATX, mATX, and Mini-ITX motherboards. Two versions …

At Computex this week, be quiet! is launching new products across the board, including new AIO liquid coolers, new fans, new power supplies and even new gaming peripherals.  The Dark Power Pro 14 IO flagship power supply arrives in 1300W and 1600W variants, offering 80 Plus Titanium efficiency, ATX 3.1 …

Geometric Future is bringing a wide range of new PC cases and cooling hardware to Computex 2026, including its next flagship tower case and early prototypes of upcoming designs. The company is also showing updates across its PSU, cooling and compact‑case lineups. The Model 9 leads the pack as the …

What on earth is Hypersplit technology, and is it any good?!

Sharkoon has introduced the S25 mid-tower PC case series, featuring three models – the S25-V2, the S25-W2 ARGB, and the S25 Silent. The entire lineup features a unified physical compatibility layout, delivering native support for top-mounted 360mm liquid-cooling radiators, an external 5.25-inch front drive bay, and a USB Type-C front …

Formula V Line has announced it will preview the Air Power G10 mid-tower case at Computex 2026, featuring a uniquely designed front panel with three independent fans that can be tilted to direct airflow towards different components.  The defining architectural feature of the Air Power G10 is its dynamic front …

We check out accessories for the Corsair Frame 4000, but is customising your case really worth it?

Jonsbo has introduced the D34, a new compact desktop case designed for Mini-ITX and Micro-ATX systems. Like many modern PC cases, this one does natively support back-connector motherboards, allowing users to keep cables hidden at the back of the case.  The Jonsbo D34 prioritises ventilation via metal-mesh sections on the …

Gamdias has launched its new flagship PC case - the Atlas P6 CG. This one is for PC gamers who want their build to be the centrepiece of their set-up, with panoramic views of the internals, and even a dedicated platforms for displaying figurines. 

There's a new micro ATX O11 Vision from Lian Li, but is it any good?

Einarex has officially announced the Pulse PM300, a microATX case designed for high-performance setups that require a smaller footprint. Expanding the company's airflow-focused Pulse series, the new enclosure is engineered to reduce unnecessary volume while maintaining compatibility with modern hardware standards. The Pulse PM300 supports both microATX and Mini-ITX motherboard …

SAMA has introduced the S50, a compact ATX case that ships with four pre‑installed 120mm ARGB PWM fans, aiming to deliver strong airflow and lighting straight out of the box.