KitGuru KitGuru.net – Tech News | Hardware News | Hardware Reviews | IOS | Mobile | Gaming | Graphics Cards
The Antec EarthWatts 650W arrives in the traditionally designed Antec box, with accented yellow stripe down the edge.
The bundle is spartan with 4 mounting screws and a little information pamphlet included. The PSU is protected in a bag with cardboard pieces on either side. This is not a modular design.
The EarthWatts 650W is actually a rather attractive little unit, finished in a camouflage style green paint. The older unit was gray which was rather bland.
The rear of the unit is vented to allow for good airflow. There is a power switch next to the cable connector port.
The 120mm fan takes centerstage at the top behind a black grill. No gaudy multicoloured concepts for this unit, just plain old black.
All the cables emerge from an single outlet. It is rubber housed to offer some protection from fraying.
| Antec EarthWatts 650W Power Supply | ||||||
|
DC Output
|
+3.3V
|
+5V
|
+12V1
|
+12V2 |
-12V
|
+5Vsb
|
|
Max Output
|
24A
|
24A
|
38A
|
38A |
0.5A
|
2.5A
|
This design has two +12V rails, offering 38A.
| Cable | Amount |
| MB 20+4 pin | x1 |
| CPU 4+4 pin | x1 |
| PCI E 8 pin (6 pin +2) | x2 |
| Sata power connectors | x7 |
| Peripheral 4 pin (molex) | x5 |
| Floppy connector | x1 |
