Enermax Revolution 87+ 1000W Power Supply Review

1. Introduction2. Enermax Revolution 87+ 1000W (Bundle/Cabling)3. Enermax Revolution 87+ 1000W (External)4. Enermax Revolution 87+ 1000W (Internal)5. Enermax Revolution 87+ 1000W (Super High Res Gallery)6. Testing Methodology and Results7. Closing Thoughts8. View All Pages

Enermax are using a A142512M-0A fan inside the Revolution 87+ 1000W power supply. This has seven blades and is rated 12V 0.45A. We have seen this model used within other power supplies within their range, and it has not disappointed.

The build quality of the Revolution 87+ 1000W is excellent, with a very clean internal layout. There are several rows of black heatsinks to ensure that temperatures remain in check.

The AC line filter has four Y caps, two X caps and a coil.

The design is using two primary capacitors from Panasonic which are rated to 105c, always good to see. They are rated at 390uF, 400V. Enermax are also using some secondary side capacitors from Nippon Chemi Con and KY Electrolytics with this power supply.

The cable is fully sleeved into the chassis of the Revolution 87+ power supply, ensuring no potential fraying problems over time.

Become a Patron!