Epomaker HE75 V2 Review

The Epomaker HE75 V2 promises the holy grail of 2026 gaming keyboard specs: a wireless, 75% layout Hall Effect board equipped with a massive 8000mAh battery, all for under £90. On paper, it looks like an incredible budget powerhouse poised to challenge keyboards twice its price. But does the real-world user experience actually live up to the impressive physical hardware, or are there frustrating compromises hiding beneath the surface?

Timestamps:

00:00 Intro
00:54 Meet the HE75 V2
01:57 Switches + sound profile
03:19 Performance
05:02 Battery life
06:42 Rapid trigger shenanigans
09:30 Driver discussions
10:57 Closing thoughts

Specifications:

• Form Factor: 75% Layout with Rotary Knob.
• Switches: EPOMAKER Creamy Jade HE Switches (Hall Effect).
• Connectivity: 2.4GHz Wireless, Bluetooth, and Wired USB-C.
• Polling Rate: Up to 8,000Hz (1,000Hz recommended).
• Battery: 8000mAh (2x4000mAh).
• Keycaps: Semi-transparent (PC material).
• Acoustics: Pre-lubed switches, zero-rattle stabilizers, and internal PE foam sheet.

Closing Thoughts

The Epomaker HE75 V2 is a keyboard that delivers incredible hardware and value but is ultimately held back by a lack of software testing and attention to detail. On the physical front, it is a triumph. For under £90, you are getting a wireless Hall Effect keyboard with butter-smooth switches, perfectly tuned stabilizers with absolutely zero rattle, and a deep, marbly acoustic profile. When we put it through a 240fps end-to-end click latency test, the HE75 V2 at 1000Hz (14.46ms wired / 16.54ms wireless) actually beat out my personal premium custom Hall Effect board by a few ms.

Interestingly the keyboard was fastest in the 1000Hz mode then on the 8000Hz mode (14.46ms vs 15.96ms) which means at the very least that 8000Hz offers, once again, an exceptionally small improvement.

However, the user experience surrounding that hardware is highly frustrating. First, despite the fact the 8000mAh battery is massive (and lasts at least 1 week with all the bells and whistles cranked to the max), it charges at a painfully slow 3W, meaning a full charge takes nearly 24 hours. Worse still is the firmware and software implementation. A hardcoded shortcut (FN + Shift) disables Rapid Trigger entirely, but the desktop driver fails to reflect this change and still shows the feature as “enabled”.

If you accidentally fat-finger this combination, you lose a crucial feature without any visual warning on your monitor. Combine this with a clunky, unresponsive app interface, and you are left with a fantastic piece of hardware that feels like it skipped the final QA testing phase.

You can buy the Epomaker HE75 V2 for under £90 HERE.

Pros:

• Incredible value for a wireless Hall Effect gaming keyboard.
• Fantastic click latency.
• Smooth “Creamy Jade” switches and perfectly tuned, zero-rattle stabilizers out of the box.
• Massive 8000mAh battery easily lasts a full week on 2.4GHz, even with RGB.

Cons:

• Hardcoded FN + Shift shortcut accidentally disables Rapid Trigger without updating the software UI.
• Painfully slow 3W charging speed means a full recharge takes nearly 24 hours.
• Terrible software UI makes adjusting switch actuation depths unnecessarily frustrating.
• Plastic chassis and PE foam design means it lacks a unique acoustic character.

KitGuru says: The Epomaker HE75 V2 offers top-tier Hall Effect performance and brilliant acoustics for an unbeatable price, but frustrating firmware bugs hold it back from true perfection.

Become a Patron!