Aerocool Mechatron Ultimate Gaming Series Chassis Review

1. Introduction2. Packaging and Bundle3. Aerocool Mechatron External4. Aerocool Mechatron Internal5. System Installation6. Testing Methodology and Thermal Performance7. Acoustical Performance8. Closing Thoughts9. View All Pages

First off we installed a Seasonic Platinum Rated 1000W Fully Modular power supply.

We then installed a Motherboard and CPU bundle. There is plenty of space around the m-ATX board for installation.

Aerocool have included 3 x 2.5″ trays and 4 x 3.5″ trays. It is just a case of clipping an SSD/HDD into them – by flexing the one side of the tray so the pins can lock into each side in turn.

You can then just slide the trays into the bays.

We also then installed a test system graphics card, a XFX Radeon 5450HD. There is clearly plenty of space for the larger high-end graphics cards.

Finally we connected everything together. This was relatively easy in this chassis but we would prefer an extra few mm behind the motherboard tray as we struggled to route our large 24-pin power cable exactly where we wanted to.

Become a Patron!