Home / Tech News / Featured Announcement / Antec Earthwatts EA 750W green Review

Antec Earthwatts EA 750W green Review

The Antec EarthWatts 750W arrives in a traditionally styled Antec package.

The bundle is rather spartan with a manual and some screws supplied. The PSU is protected in a bag with a cardboard piece on each side. As you can probably tell from the picture, it isn’t a modular design.

We like the design of the new power supply. The army style camouflage green looks very nice and is a vast improvement when compared to the older ‘plain grey’ design.

The rear of the unit is vented to allow for maximum airflow, there is a power switch above the connector port.

The fan on this specific model gets an upgrade, to a new 135mm unit. It is plain black to maintain a simple two tone appearance.

Antec EarthWatts 750W Power Supply
DC Output
+12V2 +12V3 +12V4
Max Output
40A 40A 40A

This design has four +12V rails, each of which offer 40A.

Cable Amount
MB 20+4 pin x1
CPU 4+4 pin x1
PCI E 8 pin (6 pin +2) x4
Sata power connectors x9
Peripheral 4 pin (molex) x6
Floppy connector x1

Become a Patron!

Check Also

Intel issues statement in response to 12th Gen non-K overclocking

After announcing a range of multiplier-locked (non-K) CPU SKUs at CES 2022, it didn't take long for these processors to hit the market. With German overclocker Der8auer already experimenting with base-clock (BCLK) overclocking methods for the likes of the i5-12400, Intel has now issued a statement regarding overclocking these non-K processors...