Home / Tech News / Featured Tech News / CPS PCCooler YT1200 ATX 3.1 PSU Review

CPS PCCooler YT1200 ATX 3.1 PSU Review

The YT1200 ships in a pretty nice-looking box with a high resolution image of the power supply on the front and some Cybenetics badges at the side. We prefer to see Cybenetics logos on the boxes rather than 80 Plus – it is a superior test platform.

The rear of the box is basically a spec sheet along with some information on cabling.

The power supply ships sandwiched between two thick bits of foam, with the accessories at the side.

PCCooler supply some cable ties, literature on the product, PSU tester and a power cable. Our sample came direct from Asia.

The YT1200 cables supplied with this power supply are all ribbon style for ease of routing during the install phase. They are all mostly 16AWG-18AWG and none of them have in-cable capacitors. There are a total of 9 SATA connectors over 3 cables (445mm + 150mm+150mm), a single 12+4 pin PCIe (600W) that is 650mm long. The ATX connector is 610mm long.

Become a Patron!

Check Also

Bloober Website

Bloober Team’s mysterious website updated with additional teasers

Bloober Team's mysterious website has continued to tease a new project in the lead up to its 14th of February 2026 announcement.