Samsung’s new PM9A1 PCIe 4.0 SSD for OEMs is a 980 Pro in disguise

Samsung is back with another PCIe 4 SSD – the PM9A1. The latest SSD is aimed at OEMs, but Samsung's specifications suggest that it should offer very similar performance to the pre-existing 980 Pro SSD.

Similar to the 980 Pro, the Samsung PM9A1 uses the Elpis controller, DRAM cache, and V6 NAND memory (3D TLC). Available with up to 2TB of storage, it performs at about the same level as the 980 Pro, reaching speeds of 7,000MB/s in sequential reads and up to 5,200 MB/s in sequential writes. The rated 1,000,000 random 4K read IOPS are the same as the 980 Pro, but rated random 4K write IOPS are slightly inferior, set at 850,000 IOPS.

The PM9A1 SSD does not seem to come with a heat spreader, which is reasonable considering it has been designed to be used by OEMs. However, it features thermal control technology to prevent overheating and increase the drive's lifespan.

Samsung's new client SSD has been qualified by HP for its Z series of workstations, desktops, and laptops, and is already being shipped in these devices. Other OEMs should follow in early Q2. It's unclear if these SSD drives will ever release to the DIY market, but given the fact that the similar 980 Pro SSD is widely available, this seems unlikely.

Discuss on our Facebook page, HERE.

KitGuru says: If the Samsung PM9A1 were to hit the DIY market, it would probably be cheaper than the 980 Pro. Would you consider Samsung's PM9A1 SSD if it was available at the usual retailers? 

Become a Patron!