Home / Tech News / Featured Tech Reviews / Plextor M9Pe(Y) 512GB SSD Review

Plextor M9Pe(Y) 512GB SSD Review

The ATTO Disk Benchmark performance measurement tool is compatible with Microsoft Windows. Measure your storage systems performance with various transfer sizes and test lengths for reads and writes. Several options are available to customize your performance measurement including queue depth, overlapped I/O and even a comparison mode with the option to run continuously.

Use ATTO Disk Benchmark to test any manufacturers RAID controllers, storage controllers, host adapters, hard drives and SSD drives and notice that ATTO products will consistently provide the highest level of performance to your storage.

Once again we are upgrading which ATTO version we are using for NVMe drives so have included the result screenshot from the new version.

Plextor’s official Sequential read/write speeds for the 512GB M9Pe(Y) are up to 3,200MB/s and 2,000MB/s respectively. When tested with the ATTO benchmark the review drive didn’t quite hit the maximum read figure but got pretty close at 3,154MB/s while the tested write figure bested the official one at 2,049MB/s.

Become a Patron!

Check Also

MSI MEG Z490 Ace Motherboard Review

We review MSI's £400 MEG Z490 Ace motherboard